Pool Builder & Pool Remodeling in Glendale, CA
Source: https://www.remodelyourvibe.com/services/swimming-pool-spa/glendale
Last modified: 2026-09-24T00:00:00.000Z
Text part: 1 of 1
Full website text index | Services by city | Previous page | Next page
Image: Pool with a fire table, lounge chairs and paver decking set in turf at sunset
- Glendale
Design · Permit · Build
Pool & Spa Remodeling in Glendale
We build new pools and spas, and remodel the ones already in the ground.
Book a Consultation Call 818-300-2393
Built for Glendale Homes
Glendale covers a wider range of conditions than people expect. The flats build much like Burbank, quickly and predictably, while Rossmoyne adds historic district design review for anything visible from the street. Move up into Chevy Chase Canyon or Oakmont and you are into foothill construction, where geotechnical review, slope drainage and fire-zone considerations shape both the design and the timeline.
A wide range, from flat traditional lots to steep foothill properties with long views over the basin.
We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054 .
Permits in Glendale: Glendale permits independently of LADBS. Hillside properties in the Verdugo foothills carry additional grading and geotechnical review, and parts of the foothills are mapped as Very High Fire Hazard Severity Zones.
Permit details checked September 2026 against Glendale Municipal Code and City of Glendale . Rules change, so we confirm them again for your parcel.
What We Build
- Foothill slope and drainage engineering
- Geotechnical coordination on hillside parcels
- New gunite pool and spa construction
- Full pool remodels and replastering
- Pebble, quartz and plaster interior finishes
- Waterline tile and coping replacement
- Raised and attached spas with spillways
- Baja shelves, benches and sun ledges
- Water features, fire bowls and sheer descents
- Equipment upgrades, heaters and automation
- Pool decking in pavers, concrete or travertine
- LED lighting and salt-water conversions
Local Conditions
What to Know in Glendale
These local conditions change the scope, the schedule and the budget.
01
Foothill parcels in Chevy Chase Canyon and Oakmont need slope and drainage engineering
02
Rossmoyne is Glendale's largest historic district, so street-visible walls, fences, patio covers, mechanical equipment and additions go through historic design review before permits
03
Established homes frequently need service upgrades to support modern pool equipment
Areas we serve in Glendale:RossmoyneVerdugo WoodlandsChevy Chase CanyonOakmontAdams Hill
Investment
What It Costs in Glendale
Real Southern California price ranges, not teaser numbers.
New pool construction
$70,000 to $150,000+
What moves it: size and shape, spa, water and fire features, decking material, automation, and how much access and grading the site needs
Pool remodel and resurfacing
$15,000 to $45,000
What moves it: finish choice (plaster versus pebble or quartz), tile and coping replacement, new equipment, and whether the deck is being replaced at the same time
Paver patio and hardscape
from about $13,000
What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved
Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.
Get a line-item price for your Glendale property
The Process
How We Work in Glendale
01
Site Review
We walk the property, check access, soil and slope, and confirm what the yard can actually take.
02
Design & 3D
You see the pool in 3D before anything is dug, with finishes, tile and decking chosen.
03
Plans & Permits
We draw the plans, handle engineering where the site needs it, and pull the permits. In Glendale that submittal goes to City of Glendale Community Development Department, Development Services Division.
04
Excavation & Shell
Dig, steel, plumbing and gunite. This is where site access and grading matter most.
05
Finishes
Tile, coping, decking and your chosen interior finish go in.
06
Startup & Handover
We fill, balance the water, commission the equipment and walk you through every control.
Questions
What Glendale Homeowners Ask
Who issues the permits for this work in Glendale?
City of Glendale Community Development Department, Development Services Division. Glendale permits independently of LADBS. Hillside properties in the Verdugo foothills carry additional grading and geotechnical review, and parts of the foothills are mapped as Very High Fire Hazard Severity Zones.
We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.
What makes building in Glendale different?
A wide range, from flat traditional lots to steep foothill properties with long views over the basin. One local condition that shapes the work: Foothill parcels in Chevy Chase Canyon and Oakmont need slope and drainage engineering.
Which parts of Glendale do you work in?
All of it, including Rossmoyne, Verdugo Woodlands, Chevy Chase Canyon and Oakmont. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.
What does a pool or spa project cost in Glendale?
New pool construction: generally $70,000 to $150,000+ across Southern California. What moves it is size and shape, spa, water and fire features, decking material, automation, and how much access and grading the site needs. We give line-item pricing after seeing the site rather than quoting a number over the phone.
How long does a pool remodel take?
A straightforward replaster with new tile and coping usually runs three to five weeks. A full remodel that includes new decking, equipment and features typically runs eight to twelve weeks. Site access and permit timing are the two things that move that most.
How long does a new pool take to build?
Most new pool builds run about three to five months from permit to first swim. Hillside sites that need engineered retaining or difficult access sit at the longer end of that range.
Should I replaster or fully remodel?
If the shell and plumbing are sound and you only dislike the surface, replastering with new tile and coping is the efficient choice. If the equipment is aging, the deck is cracked or the shape no longer suits how you use the yard, a full remodel costs less than doing it in two separate phases.
Do you self-perform the work?
Yes. Our own crews handle the build rather than passing it to a rotating set of subs, which is why the schedule and the finish standard stay consistent.
More Services in Glendale
Backyard & Outdoor Living in Glendale ADUs & Additions in Glendale Kitchen, Bath & Interior Remodeling in Glendale Plans, Permits & Design in Glendale Everything we build in Glendale
Pool & Spa Remodeling Nearby
Pool & Spa Remodeling in Burbank Pool & Spa Remodeling in Pasadena Pool & Spa Remodeling in Hollywood Hills Pool & Spa Remodeling in Toluca Lake Pool & Spa Remodeling in La Crescenta-Montrose Pool & Spa Remodeling in Eagle Rock
Planning Guides
Before You Build in Glendale
Costs, materials and process notes from our own projects.
Paver Patio and Driveway Cost in Glendale Paver patios in Glendale run $18 to $32 per square foot installed and driveways $20 to $35. Here is the full cost breakdown, plus what canyon slopes, retaining walls and drainage add. Read guide Building a Pool in Northridge: Costs and Permits A new pool in Northridge typically runs $85,000 to $165,000 all-in with decking and equipment. The tract lots are generous, the soil is workable, and the real variables are access, spa and deck square footage. Read guide Van Nuys Pool and Backyard Costs A new pool in Van Nuys runs $75,000 to $145,000, and a pool-plus-backyard package $110,000 to $220,000. Flat lots keep excavation honest; older service panels and gas meters are where budgets slip. Read guide Travertine vs Porcelain Pavers for SoCal Yards Travertine installs at roughly $22 to $30 per square foot, porcelain at $24 to $34. The real difference is heat, staining and how each one handles a chlorinated pool deck over ten years. Read guide
Planning a Pool in Glendale?
Sit down with your project manager and get an accurate estimate. We call you back within one business day.
Book a Consultation 818-300-2393
Licensed, bonded & insured · CSLB license #1119054
End of text part 1 of 1. This page is complete.