Skip to main content
Pool and raised spa with a fire pit, outdoor bar and lawn at dusk
Design · Permit · Build

Outdoor Kitchen Contractor in Glendale

Outdoor kitchens and BBQ islands, designed, permitted and built by one team.

Licensed contractor
California general contractor, CSLB #1119054. Bonded and insured.
Typical cost
Outdoor kitchen and BBQ island: $10,000 to $50,000+.
Permits
Issued by the City of Glendale. We handle the plans and the submittal.

Built for Glendale Homes

Glendale covers a wider range of conditions than people expect. The flats build much like Burbank, quickly and predictably, while Rossmoyne adds historic district design review for anything visible from the street. Move up into Chevy Chase Canyon or Oakmont and you are into foothill construction, where geotechnical review, slope drainage and fire-zone considerations shape both the design and the timeline.

A wide range, from flat traditional lots to steep foothill properties with long views over the basin.

What to Plan For

An outdoor kitchen is decided underground first. Where the gas, water, drain and power come from sets where the island can sit and what it costs, so we trace those runs before we draw a counter. A kitchen close to the house is usually simpler to supply than one at the far end of the yard.

Then it is about how you cook. A grill and a prep counter is a different project from a full kitchen with refrigeration, a sink, a pizza oven and bar seating. We lay it out in 3D with the appliances you actually plan to buy, so the cutouts, clearances and counter heights are right before anything is built.

Shade and the patio belong in the same plan. If the kitchen sits under a patio cover, the cover, the venting and the lighting are designed together. Our own crews build the island, run the utilities and finish the surfaces, so one team answers for all of it.

We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.

Permits in Glendale: Glendale permits independently of LADBS. Hillside properties in the Verdugo foothills carry additional grading and geotechnical review, and parts of the foothills are mapped as Very High Fire Hazard Severity Zones.

Permit details checked September 2026 against Glendale Municipal Code and City of Glendale. Rules change, so we confirm them again for your parcel.

What We Build

  • Foothill slope and drainage engineering
  • Geotechnical coordination on hillside parcels
  • Custom outdoor kitchens and BBQ islands
  • Built-in grills, side burners and griddles
  • Pizza ovens and smokers
  • Outdoor refrigeration, sinks and storage
  • Bar seating and dining counters
  • Porcelain, stone and concrete countertops
  • Stone, stucco and tile island finishes
  • Gas, water, drain and electrical runs
  • Patio covers and pergolas over the kitchen
  • Task, counter and landscape lighting

Local Conditions

What to Know in Glendale

These local conditions change the scope, the schedule and the budget.

01

Foothill parcels in Chevy Chase Canyon and Oakmont need slope and drainage engineering

02

Rossmoyne is Glendale's largest historic district, so street-visible walls, fences, patio covers, mechanical equipment and additions go through historic design review before permits

03

Established homes frequently need service upgrades to support modern pool equipment

Areas we serve in Glendale:RossmoyneVerdugo WoodlandsChevy Chase CanyonOakmontAdams Hill

Investment

What It Costs in Glendale

Real Southern California price ranges, not teaser numbers.

Outdoor kitchen and BBQ island

$10,000 to $50,000+

What moves it: counter length, appliance package, countertop material, and whether gas, water and power need to be run a long distance

Pergola and shade structure

from about $9,500

What moves it: span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating

Paver patio and hardscape

from about $13,000

What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved

Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.

Get a line-item price for your Glendale property

The Process

How We Work in Glendale

01

Site Review

We measure the yard and trace where gas, water, drain and power can come from, because that decides the layout.

02

Design & 3D

You see the kitchen in 3D with your appliances, counters and seating placed before we build.

03

Plans & Permits

New gas, plumbing and electrical, and any roof structure, are drawn and permitted where the work requires it. In Glendale that submittal goes to City of Glendale Community Development Department, Development Services Division.

04

Utilities & Base

Trenching, gas and water lines, conduit and the slab or footing the island sits on.

05

Island & Finishes

The island is framed or laid in block, then finished with counters and cladding. Appliances are set and connected.

06

Test & Handover

We test every burner, outlet and fixture, pass final inspection where one applies, and walk you through it.

Questions

What Glendale Homeowners Ask

Who issues the permits for this work in Glendale?

City of Glendale Community Development Department, Development Services Division. Glendale permits independently of LADBS. Hillside properties in the Verdugo foothills carry additional grading and geotechnical review, and parts of the foothills are mapped as Very High Fire Hazard Severity Zones.

We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

What makes building in Glendale different?

A wide range, from flat traditional lots to steep foothill properties with long views over the basin. One local condition that shapes the work: Foothill parcels in Chevy Chase Canyon and Oakmont need slope and drainage engineering.

Which parts of Glendale do you work in?

All of it, including Rossmoyne, Verdugo Woodlands, Chevy Chase Canyon and Oakmont. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

What does an outdoor kitchen cost in Glendale?

Outdoor kitchen and BBQ island: generally $10,000 to $50,000+ across Southern California. What moves it is counter length, appliance package, countertop material, and whether gas, water and power need to be run a long distance. We give line-item pricing after seeing the site rather than quoting a number over the phone.

How long does an outdoor kitchen take to build?

Most outdoor kitchens take three to six weeks of construction once the design and any permits are settled. Long utility runs, a roof structure over the kitchen and special-order appliances are what stretch that.

Does an outdoor kitchen need a permit?

New gas, plumbing and electrical lines generally do, and so does a roof structure over the kitchen in most cities. A freestanding island with no new utilities often does not. We confirm the permit path with your building department before we price the job.

Can the kitchen go under a patio cover?

Yes, with planning. A grill under a solid roof needs the clearances its manufacturer calls for and usually a vent hood, so we design the cover and the kitchen together rather than adding one to the other later.

What should I decide first?

How you cook and how many people you host. That sets the appliance list and the counter length, which are the two biggest cost drivers along with how far the utilities have to run. Finishes can be chosen later without changing the structure.

Planning an Outdoor Kitchen in Glendale?

Sit down with your project manager and get an accurate estimate. We call you back within one business day.

Licensed, bonded & insured · CSLB license #1119054