
Paver & Hardscape Contractor in Glendale
Paver patios, driveways and walls, built on a proper base by our own crews.
- Licensed contractor
- California general contractor, CSLB #1119054. Bonded and insured.
- Typical cost
- Paver patio and hardscape: from about $13,000.
- Permits
- Issued by the City of Glendale. We handle the plans and the submittal.
Built for Glendale Homes
Glendale covers a wider range of conditions than people expect. The flats build much like Burbank, quickly and predictably, while Rossmoyne adds historic district design review for anything visible from the street. Move up into Chevy Chase Canyon or Oakmont and you are into foothill construction, where geotechnical review, slope drainage and fire-zone considerations shape both the design and the timeline.
A wide range, from flat traditional lots to steep foothill properties with long views over the basin.
What to Plan For
Pavers last when the base is right. What you see is the top two or three inches. Underneath is excavation to the correct depth, a compacted base, a setting bed and an edge restraint that stops the field from spreading. That work is where a paver job is won or lost, and it is the part a low bid leaves out.
Water comes next. Hardscape changes where rain goes, so we set the slopes and add drains while the ground is open. Fixing drainage after the pavers are down means lifting them again.
The material is your choice. Concrete pavers, porcelain and natural stone such as travertine differ in look, in how hot they get underfoot and in price. A driveway needs a thicker paver and a deeper base than a patio. We bring samples and show the layout in 3D, so the pattern and the borders are settled before we order.
We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.
Permits in Glendale: Glendale permits independently of LADBS. Hillside properties in the Verdugo foothills carry additional grading and geotechnical review, and parts of the foothills are mapped as Very High Fire Hazard Severity Zones.
Permit details checked September 2026 against Glendale Municipal Code and City of Glendale. Rules change, so we confirm them again for your parcel.
What We Build
- Foothill slope and drainage engineering
- Geotechnical coordination on hillside parcels
- Paver patios and pool decks
- Paver driveways and walkways
- Concrete, porcelain and natural stone pavers
- Excavation, compacted base and edge restraint
- Drainage correction and grading
- Retaining walls and seat walls
- Steps, landings and planters
- Fire pits with built-in seating
- Artificial turf and turf joints
- Low-voltage hardscape lighting
Local Conditions
What to Know in Glendale
These local conditions change the scope, the schedule and the budget.
Foothill parcels in Chevy Chase Canyon and Oakmont need slope and drainage engineering
Rossmoyne is Glendale's largest historic district, so street-visible walls, fences, patio covers, mechanical equipment and additions go through historic design review before permits
Established homes frequently need service upgrades to support modern pool equipment
Investment
What It Costs in Glendale
Real Southern California price ranges, not teaser numbers.
Paver patio and hardscape
from about $13,000
What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved
Retaining walls
$60 to $150 per face foot
What moves it: height, whether the wall is engineered, material choice, drainage behind the wall, and access for equipment and materials
Artificial turf
from about $9,900
What moves it: area, turf grade, base depth, drainage, and any pet-specific infill
Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.
Get a line-item price for your Glendale propertyThe Process
How We Work in Glendale
Site Review
We measure the area, check soil, slope and drainage, and note access for equipment and materials.
Design & 3D
You see the layout, pattern, borders and material in 3D before anything is ordered.
Plans & Permits
Walls, driveway approaches and drainage work are drawn and permitted where your city requires it. In Glendale that submittal goes to City of Glendale Community Development Department, Development Services Division.
Demo & Excavation
Old concrete comes out and the area is dug to the depth the new base needs.
Base & Pavers
Base is placed and compacted in layers, then the setting bed, pavers, cuts and edge restraint.
Joints & Handover
Joints are filled and compacted, the surface is cleaned, and we walk the finished work with you.
Questions
What Glendale Homeowners Ask
Who issues the permits for this work in Glendale?
City of Glendale Community Development Department, Development Services Division. Glendale permits independently of LADBS. Hillside properties in the Verdugo foothills carry additional grading and geotechnical review, and parts of the foothills are mapped as Very High Fire Hazard Severity Zones.
We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.
What makes building in Glendale different?
A wide range, from flat traditional lots to steep foothill properties with long views over the basin. One local condition that shapes the work: Foothill parcels in Chevy Chase Canyon and Oakmont need slope and drainage engineering.
Which parts of Glendale do you work in?
All of it, including Rossmoyne, Verdugo Woodlands, Chevy Chase Canyon and Oakmont. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.
What does a paver or hardscape project cost in Glendale?
Paver patio and hardscape: generally from about $13,000 across Southern California. What moves it is square footage, paver type, base preparation, drainage, and any steps or retaining involved. We give line-item pricing after seeing the site rather than quoting a number over the phone.
How long does a paver project take?
Most paver patios and walkways take three to six weeks of construction. Driveways, retaining walls and drainage work add time, and so does demolition of thick existing concrete.
Do pavers need a permit?
A patio on grade usually does not. Retaining walls above a certain height, a driveway approach at the street and work that changes drainage often do, and the thresholds differ by city. We check with your building department before we price the job.
Can you pave over my existing concrete?
Sometimes, with thin pavers made for overlays, if the slab is sound and the added height works at doors and steps. A cracked or sinking slab should come out, because the pavers will follow whatever is under them.
How do I look after pavers?
Very little is needed. Sweep them, rinse them, and top up the joint sand if it washes out over the years. If one paver stains or settles it can be lifted and reset, which is the main advantage over poured concrete.
More Services in Glendale
Planning Guides
Before You Build in Glendale
Costs, materials and process notes from our own projects.
Paver Patio and Driveway Cost in Glendale
Paver patios in Glendale run $18 to $32 per square foot installed and driveways $20 to $35. Here is the full cost breakdown, plus what canyon slopes, retaining walls and drainage add.
Read guideDriveway Design Ideas for California Homes
Your driveway is the first impression of your home. Explore modern driveway designs, materials, and patterns that elevate California curb appeal.
Read guideWhy Base Preparation Matters for Hardscape Projects
The base beneath your pavers determines whether they last 5 years or 50. Learn why proper base preparation is the most important part of any hardscape project.
Read guideOutdoor Stair Design: Safe and Beautiful Grade Changes
Outdoor stairs connect different levels of your landscape while adding architectural interest. Learn about materials, code requirements, and design options.
Read guidePlanning Pavers in Glendale?
Sit down with your project manager and get an accurate estimate. We call you back within one business day.
Licensed, bonded & insured · CSLB license #1119054