Skip to main content
Side-yard patio with a fire bowl, lounge seating and turf joints at dusk
Design · Permit · Build

Paver & Hardscape Contractor in Pasadena

Paver patios, driveways and walls, built on a proper base by our own crews.

Licensed contractor
California general contractor, CSLB #1119054. Bonded and insured.
Typical cost
Paver patio and hardscape: from about $13,000.
Permits
Issued by the City of Pasadena. We handle the plans and the submittal.

Built for Pasadena Homes

We work across a city where two houses on the same street can carry completely different rulebooks: one inside a landmark district, one on a hillside lot with slope limits. Our teams plan around the Arroyo's cobble soils, protected oaks, and driveways built for Model Ts.

Before design starts we confirm zoning overlay, tree inventory, and fire-zone status, because those three items shape a pool, ADU, or addition far more than square footage does.

Parcels range from compact bungalow lots near the historic districts to large estate grounds in Oak Knoll and the San Rafael Hills. Rear yards are often deep but narrow, with alley or single-drive access.

What to Plan For

Pavers last when the base is right. What you see is the top two or three inches. Underneath is excavation to the correct depth, a compacted base, a setting bed and an edge restraint that stops the field from spreading. That work is where a paver job is won or lost, and it is the part a low bid leaves out.

Water comes next. Hardscape changes where rain goes, so we set the slopes and add drains while the ground is open. Fixing drainage after the pavers are down means lifting them again.

The material is your choice. Concrete pavers, porcelain and natural stone such as travertine differ in look, in how hot they get underfoot and in price. A driveway needs a thicker paver and a deeper base than a patio. We bring samples and show the layout in 3D, so the pattern and the borders are settled before we order.

We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.

Permits in Pasadena: Residential permits are issued through the Permit Center of the Building & Safety Division, with entitlements and design review handled inside the same Planning & Community Development Department. Certain projects on lots in the city's Hillside Overlay Districts, including major renovations, require a Hillside Development Permit under Zoning Code Chapter 17.29.

Properties inside a landmark district or individually designated need a Certificate of Appropriateness evaluated against the Secretary of the Interior's Standards. The Tree Protection Ordinance (PMC 8.52) requires a permit before removing protected trees, including native oaks over eight inches in diameter, and northern foothill parcels fall inside a Very High Fire Hazard Severity Zone.

Permit details checked September 2026 against City of Pasadena. Rules change, so we confirm them again for your parcel.

What We Build

  • Hillside Development Permit packages
  • Certificate of Appropriateness submittals
  • Protected-tree preservation plans
  • Paver patios and pool decks
  • Paver driveways and walkways
  • Concrete, porcelain and natural stone pavers
  • Excavation, compacted base and edge restraint
  • Drainage correction and grading
  • Retaining walls and seat walls
  • Steps, landings and planters
  • Fire pits with built-in seating
  • Artificial turf and turf joints
  • Low-voltage hardscape lighting

Local Conditions

What to Know in Pasadena

These local conditions change the scope, the schedule and the budget.

01

Arroyo-side and foothill lots sit on coarse alluvial fan deposits, so excavation for pools and sunken patios often hits cobble and boulder layers that slow digging and raise export costs.

02

The Raymond Fault crosses the southern edge of town, and parcels inside the state-mapped Alquist-Priolo zone need a fault investigation before new habitable structures can be sited.

03

Craftsman-era blocks were platted before cars grew, leaving single-width driveways and detached rear garages that force smaller equipment, hand-dig zones, or crane picks for pool shells.

04

Mature deodar and oak canopy shades many rear yards, which changes pool solar gain, drives root-protection fencing, and limits where a spa or detached unit foundation can land.

Areas we serve in Pasadena:Bungalow HeavenMadison HeightsLinda VistaSan Rafael HillsHastings RanchOak Knoll

Investment

What It Costs in Pasadena

Real Southern California price ranges, not teaser numbers.

Paver patio and hardscape

from about $13,000

What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved

Retaining walls

$60 to $150 per face foot

What moves it: height, whether the wall is engineered, material choice, drainage behind the wall, and access for equipment and materials

Artificial turf

from about $9,900

What moves it: area, turf grade, base depth, drainage, and any pet-specific infill

Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.

Get a line-item price for your Pasadena property

The Process

How We Work in Pasadena

01

Site Review

We measure the area, check soil, slope and drainage, and note access for equipment and materials.

02

Design & 3D

You see the layout, pattern, borders and material in 3D before anything is ordered.

03

Plans & Permits

Walls, driveway approaches and drainage work are drawn and permitted where your city requires it. In Pasadena that submittal goes to City of Pasadena Planning & Community Development Department, Building & Safety Division.

04

Demo & Excavation

Old concrete comes out and the area is dug to the depth the new base needs.

05

Base & Pavers

Base is placed and compacted in layers, then the setting bed, pavers, cuts and edge restraint.

06

Joints & Handover

Joints are filled and compacted, the surface is cleaned, and we walk the finished work with you.

Questions

What Pasadena Homeowners Ask

Who issues the permits for this work in Pasadena?

City of Pasadena Planning & Community Development Department, Building & Safety Division. Residential permits are issued through the Permit Center of the Building & Safety Division, with entitlements and design review handled inside the same Planning & Community Development Department.

Certain projects on lots in the city's Hillside Overlay Districts, including major renovations, require a Hillside Development Permit under Zoning Code Chapter 17.29. Properties inside a landmark district or individually designated need a Certificate of Appropriateness evaluated against the Secretary of the Interior's Standards.

The Tree Protection Ordinance (PMC 8.52) requires a permit before removing protected trees, including native oaks over eight inches in diameter, and northern foothill parcels fall inside a Very High Fire Hazard Severity Zone. We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

What makes building in Pasadena different?

Parcels range from compact bungalow lots near the historic districts to large estate grounds in Oak Knoll and the San Rafael Hills. Rear yards are often deep but narrow, with alley or single-drive access. One local condition that shapes the work: Arroyo-side and foothill lots sit on coarse alluvial fan deposits, so excavation for pools and sunken patios often hits cobble and boulder layers that slow digging and raise export costs.

Which parts of Pasadena do you work in?

All of it, including Bungalow Heaven, Madison Heights, Linda Vista and San Rafael Hills. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

What does a paver or hardscape project cost in Pasadena?

Paver patio and hardscape: generally from about $13,000 across Southern California. What moves it is square footage, paver type, base preparation, drainage, and any steps or retaining involved. We give line-item pricing after seeing the site rather than quoting a number over the phone.

How long does a paver project take?

Most paver patios and walkways take three to six weeks of construction. Driveways, retaining walls and drainage work add time, and so does demolition of thick existing concrete.

Do pavers need a permit?

A patio on grade usually does not. Retaining walls above a certain height, a driveway approach at the street and work that changes drainage often do, and the thresholds differ by city. We check with your building department before we price the job.

Can you pave over my existing concrete?

Sometimes, with thin pavers made for overlays, if the slab is sound and the added height works at doors and steps. A cracked or sinking slab should come out, because the pavers will follow whatever is under them.

How do I look after pavers?

Very little is needed. Sweep them, rinse them, and top up the joint sand if it washes out over the years. If one paver stains or settles it can be lifted and reset, which is the main advantage over poured concrete.

Planning Pavers in Pasadena?

Sit down with your project manager and get an accurate estimate. We call you back within one business day.

Licensed, bonded & insured · CSLB license #1119054