Skip to main content
Covered patio with a linear fire table and lounge seating
Design · Permit · Build

Patio Cover & Pergola Contractor in Pasadena

Patio covers and pergolas, engineered, permitted and built by our own crews.

Licensed contractor
California general contractor, CSLB #1119054. Bonded and insured.
Typical cost
Pergola and shade structure: from about $9,500.
Permits
Issued by the City of Pasadena. We handle the plans and the submittal.

Built for Pasadena Homes

We work across a city where two houses on the same street can carry completely different rulebooks: one inside a landmark district, one on a hillside lot with slope limits. Our teams plan around the Arroyo's cobble soils, protected oaks, and driveways built for Model Ts.

Before design starts we confirm zoning overlay, tree inventory, and fire-zone status, because those three items shape a pool, ADU, or addition far more than square footage does.

Parcels range from compact bungalow lots near the historic districts to large estate grounds in Oak Knoll and the San Rafael Hills. Rear yards are often deep but narrow, with alley or single-drive access.

What to Plan For

A patio cover is a structure, and it is designed like one. Attached to the house, it has to tie into the existing framing properly. Freestanding, it stands on its own footings. Either way the span, the posts and the footings are sized for the roof it carries, and that is what a building department reviews.

The roof decides how the space gets used. An open pergola filters the sun and keeps the sky. A solid roof gives real shade and shelter from rain. A louvered roof opens and closes, so you can have both. Wood, aluminum and steel each look and age differently, and we show you the options in 3D against your own house.

It is rarely built alone. Lighting, fans and heaters need power run to the structure, and the patio underneath often gets rebuilt at the same time. Planning them as one project means the posts land where the paving and the furniture want them.

We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.

Permits in Pasadena: Residential permits are issued through the Permit Center of the Building & Safety Division, with entitlements and design review handled inside the same Planning & Community Development Department. Certain projects on lots in the city's Hillside Overlay Districts, including major renovations, require a Hillside Development Permit under Zoning Code Chapter 17.29.

Properties inside a landmark district or individually designated need a Certificate of Appropriateness evaluated against the Secretary of the Interior's Standards. The Tree Protection Ordinance (PMC 8.52) requires a permit before removing protected trees, including native oaks over eight inches in diameter, and northern foothill parcels fall inside a Very High Fire Hazard Severity Zone.

Permit details checked September 2026 against City of Pasadena. Rules change, so we confirm them again for your parcel.

What We Build

  • Hillside Development Permit packages
  • Certificate of Appropriateness submittals
  • Protected-tree preservation plans
  • Attached patio covers
  • Freestanding pergolas and pavilions
  • Louvered roof systems
  • Solid roof covers
  • Wood, aluminum and steel structures
  • Engineered posts, beams and footings
  • Lighting, fans and heaters, wired in
  • Covers over outdoor kitchens and dining
  • Paver or concrete patios beneath
  • Plans, engineering and permits

Local Conditions

What to Know in Pasadena

These local conditions change the scope, the schedule and the budget.

01

Arroyo-side and foothill lots sit on coarse alluvial fan deposits, so excavation for pools and sunken patios often hits cobble and boulder layers that slow digging and raise export costs.

02

The Raymond Fault crosses the southern edge of town, and parcels inside the state-mapped Alquist-Priolo zone need a fault investigation before new habitable structures can be sited.

03

Craftsman-era blocks were platted before cars grew, leaving single-width driveways and detached rear garages that force smaller equipment, hand-dig zones, or crane picks for pool shells.

04

Mature deodar and oak canopy shades many rear yards, which changes pool solar gain, drives root-protection fencing, and limits where a spa or detached unit foundation can land.

Areas we serve in Pasadena:Bungalow HeavenMadison HeightsLinda VistaSan Rafael HillsHastings RanchOak Knoll

Investment

What It Costs in Pasadena

Real Southern California price ranges, not teaser numbers.

Pergola and shade structure

from about $9,500

What moves it: span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating

Paver patio and hardscape

from about $13,000

What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved

Landscape and architectural lighting

$3,000 to $12,000

What moves it: number of fixtures, transformer and cable runs, fixture quality, and whether the system is put on smart control

Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.

Get a line-item price for your Pasadena property

The Process

How We Work in Pasadena

01

Site Review

We measure the patio and the house, check where posts and footings can go, and note sun and sight lines.

02

Design & 3D

You see the cover in 3D on your own house, open, solid or louvered, in the material you choose.

03

Plans & Permits

The structure is drawn and engineered, and submitted for a permit where your city requires one. In Pasadena that submittal goes to City of Pasadena Planning & Community Development Department, Building & Safety Division.

04

Footings & Posts

Footings are dug and poured, then posts are set plumb and anchored.

05

Frame & Roof

Beams, rafters and the roof system go on, with power run for lighting, fans and heaters.

06

Finish & Handover

Stain, paint or powder coat, final electrical, inspection where one applies, and a walkthrough.

Questions

What Pasadena Homeowners Ask

Who issues the permits for this work in Pasadena?

City of Pasadena Planning & Community Development Department, Building & Safety Division. Residential permits are issued through the Permit Center of the Building & Safety Division, with entitlements and design review handled inside the same Planning & Community Development Department.

Certain projects on lots in the city's Hillside Overlay Districts, including major renovations, require a Hillside Development Permit under Zoning Code Chapter 17.29. Properties inside a landmark district or individually designated need a Certificate of Appropriateness evaluated against the Secretary of the Interior's Standards.

The Tree Protection Ordinance (PMC 8.52) requires a permit before removing protected trees, including native oaks over eight inches in diameter, and northern foothill parcels fall inside a Very High Fire Hazard Severity Zone. We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

What makes building in Pasadena different?

Parcels range from compact bungalow lots near the historic districts to large estate grounds in Oak Knoll and the San Rafael Hills. Rear yards are often deep but narrow, with alley or single-drive access. One local condition that shapes the work: Arroyo-side and foothill lots sit on coarse alluvial fan deposits, so excavation for pools and sunken patios often hits cobble and boulder layers that slow digging and raise export costs.

Which parts of Pasadena do you work in?

All of it, including Bungalow Heaven, Madison Heights, Linda Vista and San Rafael Hills. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

What does a patio cover or pergola cost in Pasadena?

Pergola and shade structure: generally from about $9,500 across Southern California. What moves it is span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating. We give line-item pricing after seeing the site rather than quoting a number over the phone.

Do I need a permit for a patio cover or pergola?

Usually yes for a cover attached to the house or one with a solid roof. Small freestanding pergolas are treated differently from city to city, and adding electrical brings its own permit. We check the rule with your building department before we price the job.

Wood, aluminum or a louvered roof?

Wood is warm and can be shaped to match almost any house, and it needs refinishing over the years. Aluminum needs very little upkeep and suits a clean, modern look. A louvered roof costs more and lets you open the space to the sky or close it for shade and rain.

Can it have lights, a fan and heaters?

Yes. They are far cleaner to add when they are planned, because the wiring runs inside the posts and beams. Adding them later usually means surface conduit.

How long does a patio cover take?

The build itself is short compared with the planning. Engineering and the plan review in your city usually set the schedule, so we give you a real timeline once we know which review your project needs.

Planning a Patio Cover in Pasadena?

Sit down with your project manager and get an accurate estimate. We call you back within one business day.

Licensed, bonded & insured · CSLB license #1119054