Skip to main content
Aerial view of a backyard with a pergola, outdoor kitchen, artificial turf and large pavers
Design · Permit · Build

Patio Cover & Pergola Contractor in Altadena

Patio covers and pergolas, engineered, permitted and built by our own crews.

Licensed contractor
California general contractor, CSLB #1119054. Bonded and insured.
Typical cost
Pergola and shade structure: from about $9,500.
Permits
Issued by LA County. We handle the plans and the submittal.

Built for Altadena Homes

Working in an unincorporated community changes the whole process: there is no city hall, and every approval routes through County departments that each review a different part of the plan. We spend real time up front on zoning under the Altadena Community Standards District, wildland-interface construction requirements, and site conditions on lots that may have burned.

Deep parcels and mountain backdrops still make this one of the best places we build outdoor space.

Lots are often deep, with genuine room for a detached structure, and grade uphill toward the mountains as you move north.

What to Plan For

A patio cover is a structure, and it is designed like one. Attached to the house, it has to tie into the existing framing properly. Freestanding, it stands on its own footings. Either way the span, the posts and the footings are sized for the roof it carries, and that is what a building department reviews.

The roof decides how the space gets used. An open pergola filters the sun and keeps the sky. A solid roof gives real shade and shelter from rain. A louvered roof opens and closes, so you can have both. Wood, aluminum and steel each look and age differently, and we show you the options in 3D against your own house.

It is rarely built alone. Lighting, fans and heaters need power run to the structure, and the patio underneath often gets rebuilt at the same time. Planning them as one project means the posts land where the paving and the furniture want them.

We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.

Permits in Altadena: Altadena is unincorporated, so building permits are issued by the County's Building and Safety Division rather than any city, with land-use and zoning review by the Los Angeles County Department of Regional Planning plus clearances from County Fire and Public Health.

Submittals run through the County's EpicLA portal, and there is a County Building and Safety office and One-Stop Permit Center on West Woodbury Road serving Eaton Fire rebuilds. Development standards come from County Code Title 22, including the Altadena Community Standards District (Section 22.320.090).

Permit details checked September 2026 against LA County, LA County Public Works and LA County Planning. Rules change, so we confirm them again for your parcel.

What We Build

  • County One-Stop Permit Center coordination
  • Wildfire-resistant exterior construction
  • Community Standards District compliance
  • Attached patio covers
  • Freestanding pergolas and pavilions
  • Louvered roof systems
  • Solid roof covers
  • Wood, aluminum and steel structures
  • Engineered posts, beams and footings
  • Lighting, fans and heaters, wired in
  • Covers over outdoor kitchens and dining
  • Paver or concrete patios beneath
  • Plans, engineering and permits

Local Conditions

What to Know in Altadena

These local conditions change the scope, the schedule and the budget.

01

Foothill parcels sit on steep alluvial and debris-flow deposits below the Angeles National Forest, so grading, drainage, and retaining engineering carry more weight than on valley-floor sites.

02

Fire-affected lots frequently need soil testing, removal of compromised foundations, and re-established utility services before any new structure, pool, or detached unit is set.

03

Wildland-interface construction dictates ignition-resistant vents, eaves, siding, glazing, and decking materials on new and replacement work.

04

Surviving mid-century houses commonly have original electrical services and clay sewer laterals that must be upgraded before pool equipment or a second dwelling can be energized.

Areas we serve in Altadena:Janes VillageAltadena Meadows

Investment

What It Costs in Altadena

Real Southern California price ranges, not teaser numbers.

Pergola and shade structure

from about $9,500

What moves it: span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating

Paver patio and hardscape

from about $13,000

What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved

Landscape and architectural lighting

$3,000 to $12,000

What moves it: number of fixtures, transformer and cable runs, fixture quality, and whether the system is put on smart control

Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.

Get a line-item price for your Altadena property

The Process

How We Work in Altadena

01

Site Review

We measure the patio and the house, check where posts and footings can go, and note sun and sight lines.

02

Design & 3D

You see the cover in 3D on your own house, open, solid or louvered, in the material you choose.

03

Plans & Permits

The structure is drawn and engineered, and submitted for a permit where your city requires one. In Altadena that submittal goes to Los Angeles County Department of Public Works, Building and Safety Division.

04

Footings & Posts

Footings are dug and poured, then posts are set plumb and anchored.

05

Frame & Roof

Beams, rafters and the roof system go on, with power run for lighting, fans and heaters.

06

Finish & Handover

Stain, paint or powder coat, final electrical, inspection where one applies, and a walkthrough.

Questions

What Altadena Homeowners Ask

Who issues the permits for this work in Altadena?

Los Angeles County Department of Public Works, Building and Safety Division. Altadena is unincorporated, so building permits are issued by the County's Building and Safety Division rather than any city, with land-use and zoning review by the Los Angeles County Department of Regional Planning plus clearances from County Fire and Public Health.

Submittals run through the County's EpicLA portal, and there is a County Building and Safety office and One-Stop Permit Center on West Woodbury Road serving Eaton Fire rebuilds. Development standards come from County Code Title 22, including the Altadena Community Standards District (Section 22.320.090).

We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

What makes building in Altadena different?

Lots are often deep, with genuine room for a detached structure, and grade uphill toward the mountains as you move north. One local condition that shapes the work: Foothill parcels sit on steep alluvial and debris-flow deposits below the Angeles National Forest, so grading, drainage, and retaining engineering carry more weight than on valley-floor sites.

Which parts of Altadena do you work in?

All of it, including Janes Village and Altadena Meadows. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

What does a patio cover or pergola cost in Altadena?

Pergola and shade structure: generally from about $9,500 across Southern California. What moves it is span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating. We give line-item pricing after seeing the site rather than quoting a number over the phone.

Do I need a permit for a patio cover or pergola?

Usually yes for a cover attached to the house or one with a solid roof. Small freestanding pergolas are treated differently from city to city, and adding electrical brings its own permit. We check the rule with your building department before we price the job.

Wood, aluminum or a louvered roof?

Wood is warm and can be shaped to match almost any house, and it needs refinishing over the years. Aluminum needs very little upkeep and suits a clean, modern look. A louvered roof costs more and lets you open the space to the sky or close it for shade and rain.

Can it have lights, a fan and heaters?

Yes. They are far cleaner to add when they are planned, because the wiring runs inside the posts and beams. Adding them later usually means surface conduit.

How long does a patio cover take?

The build itself is short compared with the planning. Engineering and the plan review in your city usually set the schedule, so we give you a real timeline once we know which review your project needs.

Planning a Patio Cover in Altadena?

Sit down with your project manager and get an accurate estimate. We call you back within one business day.

Licensed, bonded & insured · CSLB license #1119054