Skip to main content
Aerial view of a backyard with a pergola, outdoor kitchen, artificial turf and large pavers
Design · Permit · Build

Patio Cover & Pergola Contractor in Glendale

Patio covers and pergolas, engineered, permitted and built by our own crews.

Licensed contractor
California general contractor, CSLB #1119054. Bonded and insured.
Typical cost
Pergola and shade structure: from about $9,500.
Permits
Issued by the City of Glendale. We handle the plans and the submittal.

Built for Glendale Homes

Glendale covers a wider range of conditions than people expect. The flats build much like Burbank, quickly and predictably, while Rossmoyne adds historic district design review for anything visible from the street. Move up into Chevy Chase Canyon or Oakmont and you are into foothill construction, where geotechnical review, slope drainage and fire-zone considerations shape both the design and the timeline.

A wide range, from flat traditional lots to steep foothill properties with long views over the basin.

What to Plan For

A patio cover is a structure, and it is designed like one. Attached to the house, it has to tie into the existing framing properly. Freestanding, it stands on its own footings. Either way the span, the posts and the footings are sized for the roof it carries, and that is what a building department reviews.

The roof decides how the space gets used. An open pergola filters the sun and keeps the sky. A solid roof gives real shade and shelter from rain. A louvered roof opens and closes, so you can have both. Wood, aluminum and steel each look and age differently, and we show you the options in 3D against your own house.

It is rarely built alone. Lighting, fans and heaters need power run to the structure, and the patio underneath often gets rebuilt at the same time. Planning them as one project means the posts land where the paving and the furniture want them.

We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.

Permits in Glendale: Glendale permits independently of LADBS. Hillside properties in the Verdugo foothills carry additional grading and geotechnical review, and parts of the foothills are mapped as Very High Fire Hazard Severity Zones.

Permit details checked September 2026 against Glendale Municipal Code and City of Glendale. Rules change, so we confirm them again for your parcel.

What We Build

  • Foothill slope and drainage engineering
  • Geotechnical coordination on hillside parcels
  • Attached patio covers
  • Freestanding pergolas and pavilions
  • Louvered roof systems
  • Solid roof covers
  • Wood, aluminum and steel structures
  • Engineered posts, beams and footings
  • Lighting, fans and heaters, wired in
  • Covers over outdoor kitchens and dining
  • Paver or concrete patios beneath
  • Plans, engineering and permits

Local Conditions

What to Know in Glendale

These local conditions change the scope, the schedule and the budget.

01

Foothill parcels in Chevy Chase Canyon and Oakmont need slope and drainage engineering

02

Rossmoyne is Glendale's largest historic district, so street-visible walls, fences, patio covers, mechanical equipment and additions go through historic design review before permits

03

Established homes frequently need service upgrades to support modern pool equipment

Areas we serve in Glendale:RossmoyneVerdugo WoodlandsChevy Chase CanyonOakmontAdams Hill

Investment

What It Costs in Glendale

Real Southern California price ranges, not teaser numbers.

Pergola and shade structure

from about $9,500

What moves it: span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating

Paver patio and hardscape

from about $13,000

What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved

Landscape and architectural lighting

$3,000 to $12,000

What moves it: number of fixtures, transformer and cable runs, fixture quality, and whether the system is put on smart control

Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.

Get a line-item price for your Glendale property

The Process

How We Work in Glendale

01

Site Review

We measure the patio and the house, check where posts and footings can go, and note sun and sight lines.

02

Design & 3D

You see the cover in 3D on your own house, open, solid or louvered, in the material you choose.

03

Plans & Permits

The structure is drawn and engineered, and submitted for a permit where your city requires one. In Glendale that submittal goes to City of Glendale Community Development Department, Development Services Division.

04

Footings & Posts

Footings are dug and poured, then posts are set plumb and anchored.

05

Frame & Roof

Beams, rafters and the roof system go on, with power run for lighting, fans and heaters.

06

Finish & Handover

Stain, paint or powder coat, final electrical, inspection where one applies, and a walkthrough.

Questions

What Glendale Homeowners Ask

Who issues the permits for this work in Glendale?

City of Glendale Community Development Department, Development Services Division. Glendale permits independently of LADBS. Hillside properties in the Verdugo foothills carry additional grading and geotechnical review, and parts of the foothills are mapped as Very High Fire Hazard Severity Zones.

We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

What makes building in Glendale different?

A wide range, from flat traditional lots to steep foothill properties with long views over the basin. One local condition that shapes the work: Foothill parcels in Chevy Chase Canyon and Oakmont need slope and drainage engineering.

Which parts of Glendale do you work in?

All of it, including Rossmoyne, Verdugo Woodlands, Chevy Chase Canyon and Oakmont. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

What does a patio cover or pergola cost in Glendale?

Pergola and shade structure: generally from about $9,500 across Southern California. What moves it is span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating. We give line-item pricing after seeing the site rather than quoting a number over the phone.

Do I need a permit for a patio cover or pergola?

Usually yes for a cover attached to the house or one with a solid roof. Small freestanding pergolas are treated differently from city to city, and adding electrical brings its own permit. We check the rule with your building department before we price the job.

Wood, aluminum or a louvered roof?

Wood is warm and can be shaped to match almost any house, and it needs refinishing over the years. Aluminum needs very little upkeep and suits a clean, modern look. A louvered roof costs more and lets you open the space to the sky or close it for shade and rain.

Can it have lights, a fan and heaters?

Yes. They are far cleaner to add when they are planned, because the wiring runs inside the posts and beams. Adding them later usually means surface conduit.

How long does a patio cover take?

The build itself is short compared with the planning. Engineering and the plan review in your city usually set the schedule, so we give you a real timeline once we know which review your project needs.

Planning a Patio Cover in Glendale?

Sit down with your project manager and get an accurate estimate. We call you back within one business day.

Licensed, bonded & insured · CSLB license #1119054