Skip to main content
Artificial turf lawn framed by large-format pavers and olive trees
Design · Permit · Build

Paver & Hardscape Contractor in Burbank

Paver patios, driveways and walls, built on a proper base by our own crews.

Licensed contractor
California general contractor, CSLB #1119054. Bonded and insured.
Typical cost
Paver patio and hardscape: from about $13,000.
Permits
Issued by the City of Burbank. We handle the plans and the submittal.

Built for Burbank Homes

Burbank is refreshingly straightforward to build in. The lots are mostly flat, the streets have real access, and the city runs its own permitting rather than routing through LADBS. The one thing worth flagging early is the Rancho equestrian district, where horse-keeping standards genuinely affect setbacks and how the yard can be laid out.

Flat, walkable neighborhoods with practical family-sized yards, plus the distinctive Rancho equestrian pocket.

What to Plan For

Pavers last when the base is right. What you see is the top two or three inches. Underneath is excavation to the correct depth, a compacted base, a setting bed and an edge restraint that stops the field from spreading. That work is where a paver job is won or lost, and it is the part a low bid leaves out.

Water comes next. Hardscape changes where rain goes, so we set the slopes and add drains while the ground is open. Fixing drainage after the pavers are down means lifting them again.

The material is your choice. Concrete pavers, porcelain and natural stone such as travertine differ in look, in how hot they get underfoot and in price. A driveway needs a thicker paver and a deeper base than a patio. We bring samples and show the layout in 3D, so the pattern and the borders are settled before we order.

We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.

Permits in Burbank: Burbank is its own jurisdiction, so pool, ADU and hardscape permits go through the City of Burbank Building Division rather than LADBS. Plan check and inspection scheduling run on the city's own calendar.

Permit details checked September 2026 against City of Burbank and Burbank Municipal Code. Rules change, so we confirm them again for your parcel.

What We Build

  • Equestrian-district-aware layouts
  • Electrical panel upgrades on older homes
  • Paver patios and pool decks
  • Paver driveways and walkways
  • Concrete, porcelain and natural stone pavers
  • Excavation, compacted base and edge restraint
  • Drainage correction and grading
  • Retaining walls and seat walls
  • Steps, landings and planters
  • Fire pits with built-in seating
  • Artificial turf and turf joints
  • Low-voltage hardscape lighting

Local Conditions

What to Know in Burbank

These local conditions change the scope, the schedule and the budget.

01

The Rancho equestrian district has horse-keeping standards that affect setbacks and yard layout

02

Mostly flat lots keep grading simple and schedules predictable

03

Older Magnolia Park homes often need panel upgrades before pool equipment is added

Areas we serve in Burbank:Magnolia ParkRancho Equestrian DistrictBurbank HillsChandler ParkMedia District

Investment

What It Costs in Burbank

Real Southern California price ranges, not teaser numbers.

Paver patio and hardscape

from about $13,000

What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved

Retaining walls

$60 to $150 per face foot

What moves it: height, whether the wall is engineered, material choice, drainage behind the wall, and access for equipment and materials

Artificial turf

from about $9,900

What moves it: area, turf grade, base depth, drainage, and any pet-specific infill

Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.

Get a line-item price for your Burbank property

The Process

How We Work in Burbank

01

Site Review

We measure the area, check soil, slope and drainage, and note access for equipment and materials.

02

Design & 3D

You see the layout, pattern, borders and material in 3D before anything is ordered.

03

Plans & Permits

Walls, driveway approaches and drainage work are drawn and permitted where your city requires it. In Burbank that submittal goes to City of Burbank Community Development Department, Building Division.

04

Demo & Excavation

Old concrete comes out and the area is dug to the depth the new base needs.

05

Base & Pavers

Base is placed and compacted in layers, then the setting bed, pavers, cuts and edge restraint.

06

Joints & Handover

Joints are filled and compacted, the surface is cleaned, and we walk the finished work with you.

Questions

What Burbank Homeowners Ask

Who issues the permits for this work in Burbank?

City of Burbank Community Development Department, Building Division. Burbank is its own jurisdiction, so pool, ADU and hardscape permits go through the City of Burbank Building Division rather than LADBS. Plan check and inspection scheduling run on the city's own calendar.

We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

What makes building in Burbank different?

Flat, walkable neighborhoods with practical family-sized yards, plus the distinctive Rancho equestrian pocket. One local condition that shapes the work: The Rancho equestrian district has horse-keeping standards that affect setbacks and yard layout.

Which parts of Burbank do you work in?

All of it, including Magnolia Park, Rancho Equestrian District, Burbank Hills and Chandler Park. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

What does a paver or hardscape project cost in Burbank?

Paver patio and hardscape: generally from about $13,000 across Southern California. What moves it is square footage, paver type, base preparation, drainage, and any steps or retaining involved. We give line-item pricing after seeing the site rather than quoting a number over the phone.

How long does a paver project take?

Most paver patios and walkways take three to six weeks of construction. Driveways, retaining walls and drainage work add time, and so does demolition of thick existing concrete.

Do pavers need a permit?

A patio on grade usually does not. Retaining walls above a certain height, a driveway approach at the street and work that changes drainage often do, and the thresholds differ by city. We check with your building department before we price the job.

Can you pave over my existing concrete?

Sometimes, with thin pavers made for overlays, if the slab is sound and the added height works at doors and steps. A cracked or sinking slab should come out, because the pavers will follow whatever is under them.

How do I look after pavers?

Very little is needed. Sweep them, rinse them, and top up the joint sand if it washes out over the years. If one paver stains or settles it can be lifted and reset, which is the main advantage over poured concrete.

Planning Pavers in Burbank?

Sit down with your project manager and get an accurate estimate. We call you back within one business day.

Licensed, bonded & insured · CSLB license #1119054