Skip to main content
Floor plan drawings beside a rendering of a backyard pool
Design · Permit · Build

Plans, Permits & Design in Beverly Hills

Permit-ready plans, engineering and Title 24, with or without the build.

Built for Beverly Hills Homes

Beverly Hills projects are judged as much on how the work is run as on how it finishes. The city enforces construction hours, staging and street use tightly, and neighbors notice everything. A clean, quiet, well-sequenced jobsite is part of the deliverable here, alongside the finish quality itself.

Trousdale Estates and the Hillside Area north of Sunset add hillside engineering on top of that.

Estate properties where finish quality, discretion and a clean jobsite matter as much as the design itself.

We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.

Permits in Beverly Hills: Beverly Hills permits independently with its own plan check. Single-family homes in the Central Area go through design review for street-visible changes; the Hillside Area has no design review process but has its own development standards. Standards for construction hours, staging and street use are strictly enforced, and hillside properties north of Sunset carry additional grading review.

Permit details checked September 2026 against City of Beverly Hills. Rules change, so we confirm them again for your parcel.

What We Build

  • Discreet jobsite and staging management
  • Estate-grade finish detailing
  • Measured surveys and existing-condition drawings
  • Permit-ready plan sets for submittal
  • Structural engineering coordination
  • Title 24 energy compliance documentation
  • ADU and addition planning packages
  • Pool, hardscape and structure permits
  • Soils and geotechnical report coordination
  • HOA architectural review submissions
  • City submittal and plan-check correction responses
  • Inspection scheduling and sign-off

Local Conditions

What to Know in Beverly Hills

These local conditions change the scope, the schedule and the budget.

01

Trousdale Estates and Hillside Area parcels north of Sunset are hillside builds requiring engineered retaining

02

The Flats offer large level lots suited to full estate-scale outdoor programs

03

Construction staging and neighbor impact are tightly regulated and need planning up front

Areas we serve in Beverly Hills:Beverly Hills FlatsTrousdale EstatesHillside Area north of Sunset

Investment

What It Costs in Beverly Hills

Real Southern California price ranges, not teaser numbers.

Plans, drawings and permit management

$4,500 to $25,000+

What moves it: project type and size, whether structural engineering, Title 24 or a soils report is required, and how many jurisdictions or review bodies are involved

Detached ADU

$150,000 to $400,000+

What moves it: square footage, finish level, utility runs, and site access; garage conversions typically run well below a ground-up detached build

Retaining walls

$60 to $150 per face foot

What moves it: height, whether the wall is engineered, material choice, drainage behind the wall, and access for equipment and materials

Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.

Get a line-item price for your Beverly Hills property

The Process

How We Work in Beverly Hills

01

Feasibility

We check zoning, setbacks, easements and utilities to confirm what the property will actually support before you spend on drawings.

02

Survey & As-Builts

The site and existing structure are measured and drawn so the permit set starts from reality, not an old plot plan.

03

Design Development

Plans and elevations developed to the level of detail plan check expects, with 3D so you can see it clearly.

04

Consultants

Structural engineering, Title 24 and, where the site needs it, a soils report are coordinated into one set.

05

Submittal

We make the submittal and act as the applicant, so correspondence with the city comes to us rather than to you.

06

Corrections & Issue

We respond to plan-check corrections, resubmit, and see the permit through to issue.

Questions

What Beverly Hills Homeowners Ask

Who issues the permits for this work in Beverly Hills?

City of Beverly Hills Community Development Department, Building & Safety. Beverly Hills permits independently with its own plan check. Single-family homes in the Central Area go through design review for street-visible changes; the Hillside Area has no design review process but has its own development standards.

Standards for construction hours, staging and street use are strictly enforced, and hillside properties north of Sunset carry additional grading review. We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

What makes building in Beverly Hills different?

Estate properties where finish quality, discretion and a clean jobsite matter as much as the design itself. One local condition that shapes the work: Trousdale Estates and Hillside Area parcels north of Sunset are hillside builds requiring engineered retaining.

Which parts of Beverly Hills do you work in?

All of it, including Beverly Hills Flats, Trousdale Estates and Hillside Area north of Sunset. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

What do plans and permits cost in Beverly Hills?

Plans, drawings and permit management: generally $4,500 to $25,000+ across Southern California. What moves it is project type and size, whether structural engineering, Title 24 or a soils report is required, and how many jurisdictions or review bodies are involved.

We give line-item pricing after seeing the site rather than quoting a number over the phone.

Can you do the plans without doing the build?

Yes. Plans and permits is a service we sell on its own, and plenty of clients use us for the drawing set and permit management and build with someone else. We would rather do it properly than tie it to a construction contract.

Why do permit costs vary so much?

Because the required consultants vary. A straightforward patio cover needs a modest set. An ADU on a sloped lot may need structural engineering, Title 24, a soils report and a survey, and each of those is a separate specialist fee on top of the city's own plan-check and permit charges.

What causes plan-check corrections?

Most commonly incomplete structural detail, missing Title 24 forms, drainage not shown, or a discrepancy between the site plan and the survey. Corrections are normal, not a failure. The thing that costs time is a slow response to them, which is why we act as the applicant.

Do you handle HOA approval too?

Yes, where a community requires it. HOA architectural review runs on its own calendar and its own standards, entirely separately from the city, and starting it late is one of the most common reasons a project slips.

Need Plans & Permits in Beverly Hills?

Sit down with your project manager and get an accurate estimate. We call you back within one business day.

Licensed, bonded & insured · CSLB license #1119054