Pool Builder & Pool Remodeling in Bel Air, CA
Source: https://www.remodelyourvibe.com/services/swimming-pool-spa/bel-air
Last modified: 2026-09-24T00:00:00.000Z
Text part: 1 of 1
Full website text index | Services by city | Previous page | Next page
Image: Sunken fire-pit lounge with built-in seating below a modern home at twilight
- Bel Air
Design · Permit · Build
Pool & Spa Remodeling in Bel Air
We build new pools and spas, and remodel the ones already in the ground.
Book a Consultation Call 818-300-2393
Built for Bel Air Homes
The grading budget is a genuine design constraint here. The hillside district covering this community plan area caps total cut and fill per site, so a pool, a motor court and a level lawn all compete for the same cubic yards. Roads are narrow and winding, which limits truck size and dictates sequencing for concrete, steel and crane days.
Slope work usually starts with caissons and shoring long before anything looks like a backyard.
Large hillside and canyon parcels with steep slopes, limited flat buildable pad, long private driveways and substantial existing retaining infrastructure.
We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054 .
Permits in Bel Air: LADBS issues the building, grading and pool permits, as this is City of Los Angeles territory rather than a separate municipality. The Bel Air-Beverly Crest community plan area was added to the Hillside Construction Regulation supplemental use district effective March 22, 2017 (Ordinance No. 184,828), which caps grading at 6,000 cubic yards per site, adds hauling and construction activity standards, and limits exterior construction to weekdays between 8:00 a.m. and 6:00 p.m., with interior work also allowed on Saturdays during those hours.
Hauling is restricted to weekdays between 9:00 a.m. and 3:00 p.m. The Baseline Hillside Ordinance (No. 184,802) separately governs height, floor area and slope-based limits, and import or export of more than 1,000 cubic yards in a hillside grading area requires a haul route hearing before the Board of Building and Safety Commissioners.
Parcels along the Mulholland corridor also fall under the Mulholland Scenic Parkway Specific Plan, and private homeowner associations in gated tracts can add their own architectural review on top of city review.
Permit details checked September 2026 against LADBS and LA City Planning . Rules change, so we confirm them again for your parcel.
What We Build
- Grading quantity and haul route strategy
- Caisson, pile and shoring pool structures
- HOA architectural review submittals
- New gunite pool and spa construction
- Full pool remodels and replastering
- Pebble, quartz and plaster interior finishes
- Waterline tile and coping replacement
- Raised and attached spas with spillways
- Baja shelves, benches and sun ledges
- Water features, fire bowls and sheer descents
- Equipment upgrades, heaters and automation
- Pool decking in pavers, concrete or travertine
- LED lighting and salt-water conversions
Local Conditions
What to Know in Bel Air
These local conditions change the scope, the schedule and the budget.
01
A per-site grading cap means cut and fill for a pool, a motor court and a level lawn all draw from the same limited quantity, so earthwork is designed before aesthetics are settled.
02
Slope construction typically begins with caissons, tiebacks and shoring, and pool shells on descending lots often sit on structural piles rather than native grade.
03
Narrow, winding roads with tight radii limit truck and crane size, so concrete pours and steel deliveries are sequenced around access rather than convenience.
04
Excavation frequently reaches shale and bedrock at shallow depth, which slows digging and increases export volume against a fixed grading allowance.
Areas we serve in Bel Air:East Gate Bel AirWest Gate Bel AirUpper Bel AirStone CanyonCasiano
Investment
What It Costs in Bel Air
Real Southern California price ranges, not teaser numbers.
New pool construction
$70,000 to $150,000+
What moves it: size and shape, spa, water and fire features, decking material, automation, and how much access and grading the site needs
Pool remodel and resurfacing
$15,000 to $45,000
What moves it: finish choice (plaster versus pebble or quartz), tile and coping replacement, new equipment, and whether the deck is being replaced at the same time
Paver patio and hardscape
from about $13,000
What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved
Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.
Get a line-item price for your Bel Air property
The Process
How We Work in Bel Air
01
Site Review
We walk the property, check access, soil and slope, and confirm what the yard can actually take.
02
Design & 3D
You see the pool in 3D before anything is dug, with finishes, tile and decking chosen.
03
Plans & Permits
We draw the plans, handle engineering where the site needs it, and pull the permits. In Bel Air that submittal goes to Los Angeles Department of Building and Safety (LADBS).
04
Excavation & Shell
Dig, steel, plumbing and gunite. This is where site access and grading matter most.
05
Finishes
Tile, coping, decking and your chosen interior finish go in.
06
Startup & Handover
We fill, balance the water, commission the equipment and walk you through every control.
Questions
What Bel Air Homeowners Ask
Who issues the permits for this work in Bel Air?
Los Angeles Department of Building and Safety (LADBS). LADBS issues the building, grading and pool permits, as this is City of Los Angeles territory rather than a separate municipality. The Bel Air-Beverly Crest community plan area was added to the Hillside Construction Regulation supplemental use district effective March 22, 2017 (Ordinance No. 184,828), which caps grading at 6,000 cubic yards per site, adds hauling and construction activity standards, and limits exterior construction to weekdays between 8:00 a.m. and 6:00 p.m., with interior work also allowed on Saturdays during those hours.
Hauling is restricted to weekdays between 9:00 a.m. and 3:00 p.m. The Baseline Hillside Ordinance (No. 184,802) separately governs height, floor area and slope-based limits, and import or export of more than 1,000 cubic yards in a hillside grading area requires a haul route hearing before the Board of Building and Safety Commissioners.
Parcels along the Mulholland corridor also fall under the Mulholland Scenic Parkway Specific Plan, and private homeowner associations in gated tracts can add their own architectural review on top of city review. We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.
What makes building in Bel Air different?
Large hillside and canyon parcels with steep slopes, limited flat buildable pad, long private driveways and substantial existing retaining infrastructure. One local condition that shapes the work: A per-site grading cap means cut and fill for a pool, a motor court and a level lawn all draw from the same limited quantity, so earthwork is designed before aesthetics are settled.
Which parts of Bel Air do you work in?
All of it, including East Gate Bel Air, West Gate Bel Air, Upper Bel Air and Stone Canyon. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.
What does a pool or spa project cost in Bel Air?
New pool construction: generally $70,000 to $150,000+ across Southern California. What moves it is size and shape, spa, water and fire features, decking material, automation, and how much access and grading the site needs. We give line-item pricing after seeing the site rather than quoting a number over the phone.
How long does a pool remodel take?
A straightforward replaster with new tile and coping usually runs three to five weeks. A full remodel that includes new decking, equipment and features typically runs eight to twelve weeks. Site access and permit timing are the two things that move that most.
How long does a new pool take to build?
Most new pool builds run about three to five months from permit to first swim. Hillside sites that need engineered retaining or difficult access sit at the longer end of that range.
Should I replaster or fully remodel?
If the shell and plumbing are sound and you only dislike the surface, replastering with new tile and coping is the efficient choice. If the equipment is aging, the deck is cracked or the shape no longer suits how you use the yard, a full remodel costs less than doing it in two separate phases.
Do you self-perform the work?
Yes. Our own crews handle the build rather than passing it to a rotating set of subs, which is why the schedule and the finish standard stay consistent.
More Services in Bel Air
Backyard & Outdoor Living in Bel Air ADUs & Additions in Bel Air Kitchen, Bath & Interior Remodeling in Bel Air Plans, Permits & Design in Bel Air Everything we build in Bel Air
Pool & Spa Remodeling Nearby
Pool & Spa Remodeling in Brentwood Pool & Spa Remodeling in Beverly Hills Pool & Spa Remodeling in Los Angeles Pool & Spa Remodeling in Sherman Oaks Pool & Spa Remodeling in Westwood
Planning Guides
Before You Build in Bel Air
Costs, materials and process notes from our own projects.
Building a Pool in Northridge: Costs and Permits A new pool in Northridge typically runs $85,000 to $165,000 all-in with decking and equipment. The tract lots are generous, the soil is workable, and the real variables are access, spa and deck square footage. Read guide Van Nuys Pool and Backyard Costs A new pool in Van Nuys runs $75,000 to $145,000, and a pool-plus-backyard package $110,000 to $220,000. Flat lots keep excavation honest; older service panels and gas meters are where budgets slip. Read guide Travertine vs Porcelain Pavers for SoCal Yards Travertine installs at roughly $22 to $30 per square foot, porcelain at $24 to $34. The real difference is heat, staining and how each one handles a chlorinated pool deck over ten years. Read guide Pool Coping Options: Concrete, Stone and Porcelain Coping runs $28 to $55 per lineal foot in concrete, $55 to $110 in natural stone and $60 to $120 in porcelain. On an average pool perimeter that is a $2,500 to $11,000 decision. Read guide
Planning a Pool in Bel Air?
Sit down with your project manager and get an accurate estimate. We call you back within one business day.
Book a Consultation 818-300-2393
Licensed, bonded & insured · CSLB license #1119054
End of text part 1 of 1. This page is complete.