Skip to main content
Covered patio with a linear fire table and lounge seating
Design · Permit · Build

Patio Cover & Pergola Contractor in Calabasas

Patio covers and pergolas, engineered, permitted and built by our own crews.

Licensed contractor
California general contractor, CSLB #1119054. Bonded and insured.
Typical cost
Pergola and shade structure: from about $9,500.
Permits
Issued by the City of Calabasas. We handle the plans and the submittal.

Built for Calabasas Homes

Calabasas has two approval processes running at once, and underestimating the second is the most common way a project slips. The city handles permits, but inside communities like The Oaks the HOA architectural review is a real gate with its own standards and its own calendar.

We start that conversation early. Protected oaks add a third constraint that quietly dictates where equipment can go.

Estate lots inside guard-gated communities where design review standards are high and the finish level expected is correspondingly high.

What to Plan For

A patio cover is a structure, and it is designed like one. Attached to the house, it has to tie into the existing framing properly. Freestanding, it stands on its own footings. Either way the span, the posts and the footings are sized for the roof it carries, and that is what a building department reviews.

The roof decides how the space gets used. An open pergola filters the sun and keeps the sky. A solid roof gives real shade and shelter from rain. A louvered roof opens and closes, so you can have both. Wood, aluminum and steel each look and age differently, and we show you the options in 3D against your own house.

It is rarely built alone. Lighting, fans and heaters need power run to the structure, and the patio underneath often gets rebuilt at the same time. Planning them as one project means the posts land where the paving and the furniture want them.

We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.

Permits in Calabasas: Calabasas permits through its own Building & Safety division and enforces an oak tree protection ordinance. The entire city is mapped as a Very High Fire Hazard Severity Zone on CAL FIRE's March 2025 map, and most gated communities add an HOA architectural review that runs in parallel with the city process.

Permit details checked September 2026 against City of Calabasas. Rules change, so we confirm them again for your parcel.

What We Build

  • HOA architectural review packages
  • Protected-oak-aware excavation planning
  • Attached patio covers
  • Freestanding pergolas and pavilions
  • Louvered roof systems
  • Solid roof covers
  • Wood, aluminum and steel structures
  • Engineered posts, beams and footings
  • Lighting, fans and heaters, wired in
  • Covers over outdoor kitchens and dining
  • Paver or concrete patios beneath
  • Plans, engineering and permits

Local Conditions

What to Know in Calabasas

These local conditions change the scope, the schedule and the budget.

01

HOA architectural approval in communities like The Oaks is a real, separate gate that should be started early

02

Protected oaks constrain excavation footprints and equipment routing

03

Hillside parcels need engineered retaining and slope drainage

04

Fire-zone rules shape material selection and defensible-space planting

Areas we serve in Calabasas:The OaksMont CalabasasCalabasas ParkMountain View EstatesSaratoga Hills

Investment

What It Costs in Calabasas

Real Southern California price ranges, not teaser numbers.

Pergola and shade structure

from about $9,500

What moves it: span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating

Paver patio and hardscape

from about $13,000

What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved

Landscape and architectural lighting

$3,000 to $12,000

What moves it: number of fixtures, transformer and cable runs, fixture quality, and whether the system is put on smart control

Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.

Get a line-item price for your Calabasas property

The Process

How We Work in Calabasas

01

Site Review

We measure the patio and the house, check where posts and footings can go, and note sun and sight lines.

02

Design & 3D

You see the cover in 3D on your own house, open, solid or louvered, in the material you choose.

03

Plans & Permits

The structure is drawn and engineered, and submitted for a permit where your city requires one. In Calabasas that submittal goes to City of Calabasas Community Development Department, Building & Safety.

04

Footings & Posts

Footings are dug and poured, then posts are set plumb and anchored.

05

Frame & Roof

Beams, rafters and the roof system go on, with power run for lighting, fans and heaters.

06

Finish & Handover

Stain, paint or powder coat, final electrical, inspection where one applies, and a walkthrough.

Questions

What Calabasas Homeowners Ask

Who issues the permits for this work in Calabasas?

City of Calabasas Community Development Department, Building & Safety. Calabasas permits through its own Building & Safety division and enforces an oak tree protection ordinance. The entire city is mapped as a Very High Fire Hazard Severity Zone on CAL FIRE's March 2025 map, and most gated communities add an HOA architectural review that runs in parallel with the city process.

We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

What makes building in Calabasas different?

Estate lots inside guard-gated communities where design review standards are high and the finish level expected is correspondingly high. One local condition that shapes the work: HOA architectural approval in communities like The Oaks is a real, separate gate that should be started early.

Which parts of Calabasas do you work in?

All of it, including The Oaks, Mont Calabasas, Calabasas Park and Mountain View Estates. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

What does a patio cover or pergola cost in Calabasas?

Pergola and shade structure: generally from about $9,500 across Southern California. What moves it is span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating. We give line-item pricing after seeing the site rather than quoting a number over the phone.

Do I need a permit for a patio cover or pergola?

Usually yes for a cover attached to the house or one with a solid roof. Small freestanding pergolas are treated differently from city to city, and adding electrical brings its own permit. We check the rule with your building department before we price the job.

Wood, aluminum or a louvered roof?

Wood is warm and can be shaped to match almost any house, and it needs refinishing over the years. Aluminum needs very little upkeep and suits a clean, modern look. A louvered roof costs more and lets you open the space to the sky or close it for shade and rain.

Can it have lights, a fan and heaters?

Yes. They are far cleaner to add when they are planned, because the wiring runs inside the posts and beams. Adding them later usually means surface conduit.

How long does a patio cover take?

The build itself is short compared with the planning. Engineering and the plan review in your city usually set the schedule, so we give you a real timeline once we know which review your project needs.

Planning a Patio Cover in Calabasas?

Sit down with your project manager and get an accurate estimate. We call you back within one business day.

Licensed, bonded & insured · CSLB license #1119054