
Patio Cover & Pergola Contractor in Agoura Hills
Patio covers and pergolas, engineered, permitted and built by our own crews.
- Licensed contractor
- California general contractor, CSLB #1119054. Bonded and insured.
- Typical cost
- Pergola and shade structure: from about $9,500.
- Permits
- Issued by the City of Agoura Hills. We handle the plans and the submittal.
Built for Agoura Hills Homes
Many backyards here back onto something protected: an oak grove, a slope, a fuel-modification buffer at the edge of the Santa Monica Mountains. That shapes the work. Pool shells get sited around root protection zones instead of through them, outdoor kitchens get non-combustible cladding, and grading is kept close to natural contour.
We plan Agoura Hills projects around the oak survey and the slope map before anyone picks a finish.
A mix of flat tract parcels with modest rear yards near the valley floor and half-acre-plus equestrian and hillside properties with slope, oaks and long driveways in the older ranch areas.
What to Plan For
A patio cover is a structure, and it is designed like one. Attached to the house, it has to tie into the existing framing properly. Freestanding, it stands on its own footings. Either way the span, the posts and the footings are sized for the roof it carries, and that is what a building department reviews.
The roof decides how the space gets used. An open pergola filters the sun and keeps the sky. A solid roof gives real shade and shelter from rain. A louvered roof opens and closes, so you can have both. Wood, aluminum and steel each look and age differently, and we show you the options in 3D against your own house.
It is rarely built alone. Lighting, fans and heaters need power run to the structure, and the patio underneath often gets rebuilt at the same time. Planning them as one project means the posts land where the paving and the furniture want them.
We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.
Permits in Agoura Hills: Residential permits are issued by the City of Agoura Hills Building and Safety Division, with planning and architectural review handled in the same Community Development Department. The City's protected tree regulations (AHMC 9657, updated by Ordinance 25-482 in December 2025) protect every scrub oak regardless of size, plus any oak, California sycamore or Southern California black walnut measuring six inches or more at 4.5 feet above grade.
The tree protection zone starts five feet outside the dripline and is never less than 15 feet from the trunk, so grading, trenching or paving inside it requires a protected tree permit. Parcels in or partly in a designated hillside area need architectural review approval or a conditional use permit before a building or grading permit can issue.
CAL FIRE's March 2025 local responsibility area maps place the large majority of the city in high or very high fire hazard severity zones, which drives defensible space and exterior material requirements.
Permit details checked September 2026 against Agoura Hills Municipal Code and City of Agoura Hills. Rules change, so we confirm them again for your parcel.
What We Build
- Protected tree permit coordination
- Hillside grading and retaining design
- Fire-resistant outdoor living materials
- Attached patio covers
- Freestanding pergolas and pavilions
- Louvered roof systems
- Solid roof covers
- Wood, aluminum and steel structures
- Engineered posts, beams and footings
- Lighting, fans and heaters, wired in
- Covers over outdoor kitchens and dining
- Paver or concrete patios beneath
- Plans, engineering and permits
Local Conditions
What to Know in Agoura Hills
These local conditions change the scope, the schedule and the budget.
Decomposed granite and clay-rich hillside soils vary sharply within a single parcel, so pool shells and detached structure foundations usually need a project-specific soils report rather than a standard detail.
Mature coast live oaks sit close to houses, and their tree protection zones begin five feet outside the dripline and are never less than 15 feet from the trunk, which pushes excavation, trenching and equipment staging away from the canopy.
Sloping rear yards mean retaining walls and deepened footings are often the first line item on a backyard budget rather than an upgrade.
Fuel-modification requirements along the wildland edge shape plant palettes, decking material and any shade structure inside the defensible-space band.
Investment
What It Costs in Agoura Hills
Real Southern California price ranges, not teaser numbers.
Pergola and shade structure
from about $9,500
What moves it: span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating
Paver patio and hardscape
from about $13,000
What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved
Landscape and architectural lighting
$3,000 to $12,000
What moves it: number of fixtures, transformer and cable runs, fixture quality, and whether the system is put on smart control
Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.
Get a line-item price for your Agoura Hills propertyThe Process
How We Work in Agoura Hills
Site Review
We measure the patio and the house, check where posts and footings can go, and note sun and sight lines.
Design & 3D
You see the cover in 3D on your own house, open, solid or louvered, in the material you choose.
Plans & Permits
The structure is drawn and engineered, and submitted for a permit where your city requires one. In Agoura Hills that submittal goes to City of Agoura Hills Community Development Department, Building and Safety Division.
Footings & Posts
Footings are dug and poured, then posts are set plumb and anchored.
Frame & Roof
Beams, rafters and the roof system go on, with power run for lighting, fans and heaters.
Finish & Handover
Stain, paint or powder coat, final electrical, inspection where one applies, and a walkthrough.
Questions
What Agoura Hills Homeowners Ask
Who issues the permits for this work in Agoura Hills?
City of Agoura Hills Community Development Department, Building and Safety Division. Residential permits are issued by the City of Agoura Hills Building and Safety Division, with planning and architectural review handled in the same Community Development Department.
The City's protected tree regulations (AHMC 9657, updated by Ordinance 25-482 in December 2025) protect every scrub oak regardless of size, plus any oak, California sycamore or Southern California black walnut measuring six inches or more at 4.5 feet above grade.
The tree protection zone starts five feet outside the dripline and is never less than 15 feet from the trunk, so grading, trenching or paving inside it requires a protected tree permit. Parcels in or partly in a designated hillside area need architectural review approval or a conditional use permit before a building or grading permit can issue.
CAL FIRE's March 2025 local responsibility area maps place the large majority of the city in high or very high fire hazard severity zones, which drives defensible space and exterior material requirements. We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.
What makes building in Agoura Hills different?
A mix of flat tract parcels with modest rear yards near the valley floor and half-acre-plus equestrian and hillside properties with slope, oaks and long driveways in the older ranch areas. One local condition that shapes the work: Decomposed granite and clay-rich hillside soils vary sharply within a single parcel, so pool shells and detached structure foundations usually need a project-specific soils report rather than a standard detail.
Which parts of Agoura Hills do you work in?
All of it, including Old Agoura, Morrison Ranch, Lake Lindero and Liberty Canyon. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.
What does a patio cover or pergola cost in Agoura Hills?
Pergola and shade structure: generally from about $9,500 across Southern California. What moves it is span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating. We give line-item pricing after seeing the site rather than quoting a number over the phone.
Do I need a permit for a patio cover or pergola?
Usually yes for a cover attached to the house or one with a solid roof. Small freestanding pergolas are treated differently from city to city, and adding electrical brings its own permit. We check the rule with your building department before we price the job.
Wood, aluminum or a louvered roof?
Wood is warm and can be shaped to match almost any house, and it needs refinishing over the years. Aluminum needs very little upkeep and suits a clean, modern look. A louvered roof costs more and lets you open the space to the sky or close it for shade and rain.
Can it have lights, a fan and heaters?
Yes. They are far cleaner to add when they are planned, because the wiring runs inside the posts and beams. Adding them later usually means surface conduit.
How long does a patio cover take?
The build itself is short compared with the planning. Engineering and the plan review in your city usually set the schedule, so we give you a real timeline once we know which review your project needs.
More Services in Agoura Hills
Planning Guides
Before You Build in Agoura Hills
Costs, materials and process notes from our own projects.
Whole-Home Remodel Sequencing: What to Do First
A whole-home remodel done in the wrong order costs 15 to 25 percent more. Here is the correct sequence, from structural and roof through to paint, and why each stage has to precede the next.
Read guideIndoor-Outdoor Living Conversions in Southern California
A 16-foot multi-slide door runs $18,000 to $45,000 installed. Here is how the full indoor-outdoor conversion works, from structural header to flush threshold to covered patio tie-in.
Read guideTarzana Outdoor Living: Costs by Lot Type
Tarzana backyards run hot and deep. A working outdoor living build here (shade, hardscape, kitchen, lighting) typically lands between $85,000 and $220,000, and the ground drives most of the number.
Read guidePorter Ranch Backyards: Wind, Slope and Fire Zones
A full backyard transformation in Porter Ranch runs $95,000 to $280,000. Wind exposure, slope, HOA review and fire-zone material rules shape the design before anything about style enters the conversation.
Read guidePlanning a Patio Cover in Agoura Hills?
Sit down with your project manager and get an accurate estimate. We call you back within one business day.
Licensed, bonded & insured · CSLB license #1119054