Skip to main content
Covered patio with a linear fire table and lounge seating
Design · Permit · Build

Patio Cover & Pergola Contractor in Westlake Village

Patio covers and pergolas, engineered, permitted and built by our own crews.

Licensed contractor
California general contractor, CSLB #1119054. Bonded and insured.
Typical cost
Pergola and shade structure: from about $9,500.
Permits
Issued by LA County. We handle the plans and the submittal.

Built for Westlake Village Homes

One thing surprises owners here more than anything else: the City handles planning and design review, but building permits and inspections come from Los Angeles County, which Westlake Village contracts with for building and safety. So a backyard project moves through two separate desks.

We sequence it that way from the start (City design review first, then County plan check through EPIC-LA) and keep any HOA architectural review running alongside.

Mostly planned-development parcels: modest, well-defined rear yards in the older neighborhoods, waterfront lots with dock frontage on the island, and larger slope-backed lots along the hillside edges.

What to Plan For

A patio cover is a structure, and it is designed like one. Attached to the house, it has to tie into the existing framing properly. Freestanding, it stands on its own footings. Either way the span, the posts and the footings are sized for the roof it carries, and that is what a building department reviews.

The roof decides how the space gets used. An open pergola filters the sun and keeps the sky. A solid roof gives real shade and shelter from rain. A louvered roof opens and closes, so you can have both. Wood, aluminum and steel each look and age differently, and we show you the options in 3D against your own house.

It is rarely built alone. Lighting, fans and heaters need power run to the structure, and the patio underneath often gets rebuilt at the same time. Planning them as one project means the posts land where the paving and the furniture want them.

We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.

Permits in Westlake Village: The City contracts with Los Angeles County for building and safety, so plan check, permit issuance and inspections are handled by the County Department of Public Works Building and Safety Division through its Calabasas office and the EPIC-LA online system, while planning and design review stay with the City's Planning Department at City Hall.

Any permit or zoning clearance for new construction or exterior changes must meet the City's design standards (WVMC 9.15), and uses in the RPD zone need a planned development permit, although alterations to an existing single-family home are exempt (WVMC 9.6.070).

Parcels inside the Hillside Management Area must meet the City's hillside development standards, which call for preserving prominent ridgelines and minimizing grading. We also check any HOA CC&Rs for a separate architectural approval.

Permit details checked September 2026 against City of Westlake Village and Westlake Village Municipal Code. Rules change, so we confirm them again for your parcel.

What We Build

  • City design review plus County plan check sequencing
  • HOA architectural submittals
  • Lakefront and hillside retaining design
  • Attached patio covers
  • Freestanding pergolas and pavilions
  • Louvered roof systems
  • Solid roof covers
  • Wood, aluminum and steel structures
  • Engineered posts, beams and footings
  • Lighting, fans and heaters, wired in
  • Covers over outdoor kitchens and dining
  • Paver or concrete patios beneath
  • Plans, engineering and permits

Local Conditions

What to Know in Westlake Village

These local conditions change the scope, the schedule and the budget.

01

Lakefront parcels need a site-specific soils investigation before pool shell and retaining design.

02

Hillside Management Area parcels must preserve prominent ridgelines and minimize grading, which pushes outdoor living into stepped terraces rather than a single pad.

03

Island and cul-de-sac lots have tight street frontage, so excavation spoil, gunite and equipment access frequently require conveyor or crane staging.

04

Wildland-adjacent slopes on the southern and western edges bring defensible-space obligations directly into the landscape and hardscape plan.

Areas we serve in Westlake Village:Westlake IslandFirst NeighborhoodThree SpringsWatergateSouthshore

Investment

What It Costs in Westlake Village

Real Southern California price ranges, not teaser numbers.

Pergola and shade structure

from about $9,500

What moves it: span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating

Paver patio and hardscape

from about $13,000

What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved

Landscape and architectural lighting

$3,000 to $12,000

What moves it: number of fixtures, transformer and cable runs, fixture quality, and whether the system is put on smart control

Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.

Get a line-item price for your Westlake Village property

The Process

How We Work in Westlake Village

01

Site Review

We measure the patio and the house, check where posts and footings can go, and note sun and sight lines.

02

Design & 3D

You see the cover in 3D on your own house, open, solid or louvered, in the material you choose.

03

Plans & Permits

The structure is drawn and engineered, and submitted for a permit where your city requires one. In Westlake Village that submittal goes to Los Angeles County Department of Public Works, Building and Safety Division (under contract to the City of Westlake Village).

04

Footings & Posts

Footings are dug and poured, then posts are set plumb and anchored.

05

Frame & Roof

Beams, rafters and the roof system go on, with power run for lighting, fans and heaters.

06

Finish & Handover

Stain, paint or powder coat, final electrical, inspection where one applies, and a walkthrough.

Questions

What Westlake Village Homeowners Ask

Who issues the permits for this work in Westlake Village?

Los Angeles County Department of Public Works, Building and Safety Division (under contract to the City of Westlake Village). The City contracts with Los Angeles County for building and safety, so plan check, permit issuance and inspections are handled by the County Department of Public Works Building and Safety Division through its Calabasas office and the EPIC-LA online system, while planning and design review stay with the City's Planning Department at City Hall.

Any permit or zoning clearance for new construction or exterior changes must meet the City's design standards (WVMC 9.15), and uses in the RPD zone need a planned development permit, although alterations to an existing single-family home are exempt (WVMC 9.6.070).

Parcels inside the Hillside Management Area must meet the City's hillside development standards, which call for preserving prominent ridgelines and minimizing grading. We also check any HOA CC&Rs for a separate architectural approval. We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

What makes building in Westlake Village different?

Mostly planned-development parcels: modest, well-defined rear yards in the older neighborhoods, waterfront lots with dock frontage on the island, and larger slope-backed lots along the hillside edges. One local condition that shapes the work: Lakefront parcels need a site-specific soils investigation before pool shell and retaining design.

Which parts of Westlake Village do you work in?

All of it, including Westlake Island, First Neighborhood, Three Springs and Watergate. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

What does a patio cover or pergola cost in Westlake Village?

Pergola and shade structure: generally from about $9,500 across Southern California. What moves it is span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating. We give line-item pricing after seeing the site rather than quoting a number over the phone.

Do I need a permit for a patio cover or pergola?

Usually yes for a cover attached to the house or one with a solid roof. Small freestanding pergolas are treated differently from city to city, and adding electrical brings its own permit. We check the rule with your building department before we price the job.

Wood, aluminum or a louvered roof?

Wood is warm and can be shaped to match almost any house, and it needs refinishing over the years. Aluminum needs very little upkeep and suits a clean, modern look. A louvered roof costs more and lets you open the space to the sky or close it for shade and rain.

Can it have lights, a fan and heaters?

Yes. They are far cleaner to add when they are planned, because the wiring runs inside the posts and beams. Adding them later usually means surface conduit.

How long does a patio cover take?

The build itself is short compared with the planning. Engineering and the plan review in your city usually set the schedule, so we give you a real timeline once we know which review your project needs.

Planning a Patio Cover in Westlake Village?

Sit down with your project manager and get an accurate estimate. We call you back within one business day.

Licensed, bonded & insured · CSLB license #1119054