Skip to main content
Lit board-formed concrete retaining wall and steps on a hillside
Design · Permit · Build

Paver & Hardscape Contractor in Westlake Village

Paver patios, driveways and walls, built on a proper base by our own crews.

Licensed contractor
California general contractor, CSLB #1119054. Bonded and insured.
Typical cost
Paver patio and hardscape: from about $13,000.
Permits
Issued by LA County. We handle the plans and the submittal.

Built for Westlake Village Homes

One thing surprises owners here more than anything else: the City handles planning and design review, but building permits and inspections come from Los Angeles County, which Westlake Village contracts with for building and safety. So a backyard project moves through two separate desks.

We sequence it that way from the start (City design review first, then County plan check through EPIC-LA) and keep any HOA architectural review running alongside.

Mostly planned-development parcels: modest, well-defined rear yards in the older neighborhoods, waterfront lots with dock frontage on the island, and larger slope-backed lots along the hillside edges.

What to Plan For

Pavers last when the base is right. What you see is the top two or three inches. Underneath is excavation to the correct depth, a compacted base, a setting bed and an edge restraint that stops the field from spreading. That work is where a paver job is won or lost, and it is the part a low bid leaves out.

Water comes next. Hardscape changes where rain goes, so we set the slopes and add drains while the ground is open. Fixing drainage after the pavers are down means lifting them again.

The material is your choice. Concrete pavers, porcelain and natural stone such as travertine differ in look, in how hot they get underfoot and in price. A driveway needs a thicker paver and a deeper base than a patio. We bring samples and show the layout in 3D, so the pattern and the borders are settled before we order.

We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.

Permits in Westlake Village: The City contracts with Los Angeles County for building and safety, so plan check, permit issuance and inspections are handled by the County Department of Public Works Building and Safety Division through its Calabasas office and the EPIC-LA online system, while planning and design review stay with the City's Planning Department at City Hall.

Any permit or zoning clearance for new construction or exterior changes must meet the City's design standards (WVMC 9.15), and uses in the RPD zone need a planned development permit, although alterations to an existing single-family home are exempt (WVMC 9.6.070).

Parcels inside the Hillside Management Area must meet the City's hillside development standards, which call for preserving prominent ridgelines and minimizing grading. We also check any HOA CC&Rs for a separate architectural approval.

Permit details checked September 2026 against City of Westlake Village and Westlake Village Municipal Code. Rules change, so we confirm them again for your parcel.

What We Build

  • City design review plus County plan check sequencing
  • HOA architectural submittals
  • Lakefront and hillside retaining design
  • Paver patios and pool decks
  • Paver driveways and walkways
  • Concrete, porcelain and natural stone pavers
  • Excavation, compacted base and edge restraint
  • Drainage correction and grading
  • Retaining walls and seat walls
  • Steps, landings and planters
  • Fire pits with built-in seating
  • Artificial turf and turf joints
  • Low-voltage hardscape lighting

Local Conditions

What to Know in Westlake Village

These local conditions change the scope, the schedule and the budget.

01

Lakefront parcels need a site-specific soils investigation before pool shell and retaining design.

02

Hillside Management Area parcels must preserve prominent ridgelines and minimize grading, which pushes outdoor living into stepped terraces rather than a single pad.

03

Island and cul-de-sac lots have tight street frontage, so excavation spoil, gunite and equipment access frequently require conveyor or crane staging.

04

Wildland-adjacent slopes on the southern and western edges bring defensible-space obligations directly into the landscape and hardscape plan.

Areas we serve in Westlake Village:Westlake IslandFirst NeighborhoodThree SpringsWatergateSouthshore

Investment

What It Costs in Westlake Village

Real Southern California price ranges, not teaser numbers.

Paver patio and hardscape

from about $13,000

What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved

Retaining walls

$60 to $150 per face foot

What moves it: height, whether the wall is engineered, material choice, drainage behind the wall, and access for equipment and materials

Artificial turf

from about $9,900

What moves it: area, turf grade, base depth, drainage, and any pet-specific infill

Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.

Get a line-item price for your Westlake Village property

The Process

How We Work in Westlake Village

01

Site Review

We measure the area, check soil, slope and drainage, and note access for equipment and materials.

02

Design & 3D

You see the layout, pattern, borders and material in 3D before anything is ordered.

03

Plans & Permits

Walls, driveway approaches and drainage work are drawn and permitted where your city requires it. In Westlake Village that submittal goes to Los Angeles County Department of Public Works, Building and Safety Division (under contract to the City of Westlake Village).

04

Demo & Excavation

Old concrete comes out and the area is dug to the depth the new base needs.

05

Base & Pavers

Base is placed and compacted in layers, then the setting bed, pavers, cuts and edge restraint.

06

Joints & Handover

Joints are filled and compacted, the surface is cleaned, and we walk the finished work with you.

Questions

What Westlake Village Homeowners Ask

Who issues the permits for this work in Westlake Village?

Los Angeles County Department of Public Works, Building and Safety Division (under contract to the City of Westlake Village). The City contracts with Los Angeles County for building and safety, so plan check, permit issuance and inspections are handled by the County Department of Public Works Building and Safety Division through its Calabasas office and the EPIC-LA online system, while planning and design review stay with the City's Planning Department at City Hall.

Any permit or zoning clearance for new construction or exterior changes must meet the City's design standards (WVMC 9.15), and uses in the RPD zone need a planned development permit, although alterations to an existing single-family home are exempt (WVMC 9.6.070).

Parcels inside the Hillside Management Area must meet the City's hillside development standards, which call for preserving prominent ridgelines and minimizing grading. We also check any HOA CC&Rs for a separate architectural approval. We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

What makes building in Westlake Village different?

Mostly planned-development parcels: modest, well-defined rear yards in the older neighborhoods, waterfront lots with dock frontage on the island, and larger slope-backed lots along the hillside edges. One local condition that shapes the work: Lakefront parcels need a site-specific soils investigation before pool shell and retaining design.

Which parts of Westlake Village do you work in?

All of it, including Westlake Island, First Neighborhood, Three Springs and Watergate. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

What does a paver or hardscape project cost in Westlake Village?

Paver patio and hardscape: generally from about $13,000 across Southern California. What moves it is square footage, paver type, base preparation, drainage, and any steps or retaining involved. We give line-item pricing after seeing the site rather than quoting a number over the phone.

How long does a paver project take?

Most paver patios and walkways take three to six weeks of construction. Driveways, retaining walls and drainage work add time, and so does demolition of thick existing concrete.

Do pavers need a permit?

A patio on grade usually does not. Retaining walls above a certain height, a driveway approach at the street and work that changes drainage often do, and the thresholds differ by city. We check with your building department before we price the job.

Can you pave over my existing concrete?

Sometimes, with thin pavers made for overlays, if the slab is sound and the added height works at doors and steps. A cracked or sinking slab should come out, because the pavers will follow whatever is under them.

How do I look after pavers?

Very little is needed. Sweep them, rinse them, and top up the joint sand if it washes out over the years. If one paver stains or settles it can be lifted and reset, which is the main advantage over poured concrete.

Planning Pavers in Westlake Village?

Sit down with your project manager and get an accurate estimate. We call you back within one business day.

Licensed, bonded & insured · CSLB license #1119054