
Pool & Spa Remodeling in Agoura Hills
New pools, spa additions, replastering, tile and coping, and full pool remodels. Designed, permitted and built by our own crews.
Pool & Spa Remodeling built for Agoura Hills properties
Nearly every backyard we design here backs onto something protected — an oak grove, a slope, a fuel-modification buffer at the edge of the Santa Monica Mountains. That shapes the work. Pool shells get sited around root protection zones instead of through them, outdoor kitchens get non-combustible cladding, and grading is kept close to natural contour. We plan Agoura Hills projects around the oak survey and the slope map before anyone picks a finish.
A mix of flat tract parcels with modest rear yards near the valley floor and half-acre-plus equestrian and hillside properties with slope, oaks and long driveways in the older ranch areas.
We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed and insured, LIC #1119054.
Permits in Agoura Hills: Residential permits are issued by the City of Agoura Hills Building and Safety Division, with planning and architectural review handled in the same Community Development Department. The oak tree preservation ordinance protects any oak with a trunk diameter of two inches or more and establishes a protected zone extending five feet beyond the dripline, so grading, trenching or paving near a canopy requires an oak tree permit. Parcels in or partly in a designated hillside area need architectural review approval or a conditional use permit before a building or grading permit can issue. CAL FIRE's March 2025 local responsibility area maps place the large majority of the city in high or very high fire hazard severity zones, which drives defensible space and exterior material requirements.
What We Build
- Oak tree permit coordination
- Hillside grading and retaining design
- Fire-resistant outdoor living materials
- New gunite pool and spa construction
- Full pool remodels and replastering
- Pebble, quartz and plaster interior finishes
- Waterline tile and coping replacement
- Raised and attached spas with spillways
- Baja shelves, benches and sun ledges
- Water features, fire bowls and sheer descents
- Equipment upgrades, heaters and automation
- Pool decking in pavers, concrete or travertine
- LED lighting and salt-water conversions
Local Conditions
What building in Agoura Hills actually involves
Every city in Southern California builds differently. These are the things that change the scope, the schedule or the budget on Agoura Hills projects.
Decomposed granite and clay-rich hillside soils vary sharply within a single parcel, so pool shells and detached structure foundations usually need a project-specific soils report rather than a standard detail.
Mature coast live oaks sit close to houses, and their protected zones extend five feet past the dripline, which pushes excavation, trenching and equipment staging away from the canopy.
Sloping rear yards mean retaining walls and deepened footings are often the first line item on a backyard budget rather than an upgrade.
Fuel-modification requirements along the wildland edge shape plant palettes, decking material and any shade structure inside the defensible-space band.
Investment
What this costs in Agoura Hills
Real Southern California ranges, not a teaser number. Every project is priced line by line after we have seen the site.
New pool construction
$70,000 to $150,000+
What moves it: size and shape, spa, water and fire features, decking material, automation, and how much access and grading the site needs
Pool remodel and resurfacing
$15,000 to $45,000
What moves it: finish choice (plaster versus pebble or quartz), tile and coping replacement, new equipment, and whether the deck is being replaced at the same time
Paver patio and hardscape
from about $13,000
What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved
How We Build
Your Agoura Hills project, step by step
Site Review
We walk the property, check access, soil and slope, and confirm what the yard can actually take.
Design & 3D
You see the pool in 3D before anything is dug, with finishes, tile and decking chosen.
Plans & Permits
We draw the plans, handle engineering where the site needs it, and pull the permits. In Agoura Hills that submittal goes to City of Agoura Hills Community Development Department, Building and Safety Division.
Excavation & Shell
Dig, steel, plumbing and gunite. This is where site access and grading matter most.
Finishes
Tile, coping, decking and your chosen interior finish go in.
Startup & Handover
We fill, balance the water, commission the equipment and walk you through every control.
Agoura Hills Questions
Common questions from Agoura Hills homeowners
Who issues the permits for this work in Agoura Hills?
City of Agoura Hills Community Development Department, Building and Safety Division. Residential permits are issued by the City of Agoura Hills Building and Safety Division, with planning and architectural review handled in the same Community Development Department. The oak tree preservation ordinance protects any oak with a trunk diameter of two inches or more and establishes a protected zone extending five feet beyond the dripline, so grading, trenching or paving near a canopy requires an oak tree permit. Parcels in or partly in a designated hillside area need architectural review approval or a conditional use permit before a building or grading permit can issue. CAL FIRE's March 2025 local responsibility area maps place the large majority of the city in high or very high fire hazard severity zones, which drives defensible space and exterior material requirements. We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing the city.
What makes building in Agoura Hills different?
A mix of flat tract parcels with modest rear yards near the valley floor and half-acre-plus equestrian and hillside properties with slope, oaks and long driveways in the older ranch areas. In practice that means decomposed granite and clay-rich hillside soils vary sharply within a single parcel, so pool shells and detached structure foundations usually need a project-specific soils report rather than a standard detail..
Which parts of Agoura Hills do you work in?
All of it, including Old Agoura, Morrison Ranch, Lake Lindero, Liberty Canyon. We are based in Los Angeles at Cahuenga Pass, so Agoura Hills is a short run for our crews rather than a job we service from out of the area.
What does pool & spa remodeling cost in Agoura Hills?
New pool construction in this market generally runs $70,000 to $150,000+. What moves it is size and shape, spa, water and fire features, decking material, automation, and how much access and grading the site needs. We give line-item pricing after seeing the site rather than quoting a number over the phone.
How long does a pool remodel take?
A straightforward replaster with new tile and coping usually runs three to five weeks. A full remodel that includes new decking, equipment and features typically runs eight to twelve weeks. Site access and permit timing are the two things that move that most.
How long does a new pool take to build?
Most new pool builds run about three to five months from permit to first swim. Hillside sites that need engineered retaining or difficult access sit at the longer end of that range.
Should I replaster or fully remodel?
If the shell and plumbing are sound and you only dislike the surface, replastering with new tile and coping is the efficient choice. If the equipment is aging, the deck is cracked or the shape no longer suits how you use the yard, a full remodel costs less than doing it in two separate phases.
Do you self-perform the work?
Yes. Our own crews handle the build rather than passing it to a rotating set of subs, which is why the schedule and the finish standard stay consistent.
More services in Agoura Hills
Agoura Hills Guides
Planning guides for Agoura Hills homeowners
Costs, materials and process notes from our own projects.
Building a Pool in Northridge: Costs, Soil and the LADBS Process
A new pool in Northridge typically runs $85,000 to $165,000 all-in with decking and equipment. The tract lots are generous, the soil is workable, and the real variables are access, spa and deck square footage.
Read guideVan Nuys Pool and Backyard Guide: Costs on the Valley Floor
A new pool in Van Nuys runs $75,000 to $145,000, and a pool-plus-backyard package $110,000 to $220,000. Flat lots keep excavation honest; older service panels and gas meters are where budgets slip.
Read guideTravertine vs Porcelain Pavers: The Honest Comparison for SoCal Yards
Travertine installs at roughly $22 to $30 per square foot, porcelain at $24 to $34. The real difference is heat, staining and how each one handles a chlorinated pool deck over ten years.
Read guidePool Coping Compared: Cast Concrete, Natural Stone and Porcelain
Coping runs $28 to $55 per lineal foot in concrete, $55 to $110 in natural stone and $60 to $120 in porcelain. On an average pool perimeter that is a $2,500 to $11,000 decision.
Read guidePlanning pool & spa remodeling in Agoura Hills?
Sit down with your project manager, go through the details, and get an accurate estimate for your property.
Licensed & Insured · LIC #1119054
