
Paver & Hardscape Contractor in Sherman Oaks
Paver patios, driveways and walls, built on a proper base by our own crews.
- Licensed contractor
- California general contractor, CSLB #1119054. Bonded and insured.
- Typical cost
- Paver patio and hardscape: from about $13,000.
- Permits
- Issued by LADBS. We handle the plans and the submittal.
Built for Sherman Oaks Homes
Sherman Oaks rewards planning. North of the boulevard the lots are flat and generous, and the temptation is to fill them; the better outcome is usually fewer, larger zones with real circulation between them. South of the boulevard the hillside parcels come with view potential that is worth designing around, and structural work that has to be resolved before anything decorative happens.
Established mid-century homes on generous flat lots north of the boulevard, and steeper view parcels to the south where structural work leads the schedule.
What to Plan For
Pavers last when the base is right. What you see is the top two or three inches. Underneath is excavation to the correct depth, a compacted base, a setting bed and an edge restraint that stops the field from spreading. That work is where a paver job is won or lost, and it is the part a low bid leaves out.
Water comes next. Hardscape changes where rain goes, so we set the slopes and add drains while the ground is open. Fixing drainage after the pavers are down means lifting them again.
The material is your choice. Concrete pavers, porcelain and natural stone such as travertine differ in look, in how hot they get underfoot and in price. A driveway needs a thicker paver and a deeper base than a patio. We bring samples and show the layout in 3D, so the pattern and the borders are settled before we order.
We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.
Permits in Sherman Oaks: Private pools in the City of Los Angeles are permitted through a Combined Building-Mechanical permit, while pools serving more than two dwelling units need separate building, electrical, plumbing and mechanical permits. Using a City of Los Angeles standard plan on file with LADBS reduces plan check time.
South-of-the-boulevard hillside parcels are in the Hillside Area. There the Baseline Hillside Ordinance caps grading and import/export quantities, and LAMC 12.21 C.8 separately limits retaining-wall height. A pool there also needs its own LADBS grading permit, and much of the area is a Very High Fire Hazard Severity Zone.
Permit details checked September 2026 against LADBS and LA City Clerk. Rules change, so we confirm them again for your parcel.
What We Build
- Retaining and slope drainage
- Mature-landscape protection during excavation
- Paver patios and pool decks
- Paver driveways and walkways
- Concrete, porcelain and natural stone pavers
- Excavation, compacted base and edge restraint
- Drainage correction and grading
- Retaining walls and seat walls
- Steps, landings and planters
- Fire pits with built-in seating
- Artificial turf and turf joints
- Low-voltage hardscape lighting
Local Conditions
What to Know in Sherman Oaks
These local conditions change the scope, the schedule and the budget.
Flat lots north of Ventura Boulevard suit full backyard builds with pool, kitchen and lawn in one phase
Hillside parcels to the south typically require retaining walls and slope stabilization first
Mature landscaping and established root systems often dictate excavation routing
Investment
What It Costs in Sherman Oaks
Real Southern California price ranges, not teaser numbers.
Paver patio and hardscape
from about $13,000
What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved
Retaining walls
$60 to $150 per face foot
What moves it: height, whether the wall is engineered, material choice, drainage behind the wall, and access for equipment and materials
Artificial turf
from about $9,900
What moves it: area, turf grade, base depth, drainage, and any pet-specific infill
Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.
Get a line-item price for your Sherman Oaks propertyThe Process
How We Work in Sherman Oaks
Site Review
We measure the area, check soil, slope and drainage, and note access for equipment and materials.
Design & 3D
You see the layout, pattern, borders and material in 3D before anything is ordered.
Plans & Permits
Walls, driveway approaches and drainage work are drawn and permitted where your city requires it. In Sherman Oaks that submittal goes to Los Angeles Department of Building and Safety (LADBS).
Demo & Excavation
Old concrete comes out and the area is dug to the depth the new base needs.
Base & Pavers
Base is placed and compacted in layers, then the setting bed, pavers, cuts and edge restraint.
Joints & Handover
Joints are filled and compacted, the surface is cleaned, and we walk the finished work with you.
Questions
What Sherman Oaks Homeowners Ask
Who issues the permits for this work in Sherman Oaks?
Los Angeles Department of Building and Safety (LADBS). Private pools in the City of Los Angeles are permitted through a Combined Building-Mechanical permit, while pools serving more than two dwelling units need separate building, electrical, plumbing and mechanical permits.
Using a City of Los Angeles standard plan on file with LADBS reduces plan check time. South-of-the-boulevard hillside parcels are in the Hillside Area. There the Baseline Hillside Ordinance caps grading and import/export quantities, and LAMC 12.21 C.8 separately limits retaining-wall height.
A pool there also needs its own LADBS grading permit, and much of the area is a Very High Fire Hazard Severity Zone. We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.
What makes building in Sherman Oaks different?
Established mid-century homes on generous flat lots north of the boulevard, and steeper view parcels to the south where structural work leads the schedule. One local condition that shapes the work: Flat lots north of Ventura Boulevard suit full backyard builds with pool, kitchen and lawn in one phase.
Which parts of Sherman Oaks do you work in?
All of it, including Chandler Estates and Magnolia Woods. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.
What does a paver or hardscape project cost in Sherman Oaks?
Paver patio and hardscape: generally from about $13,000 across Southern California. What moves it is square footage, paver type, base preparation, drainage, and any steps or retaining involved. We give line-item pricing after seeing the site rather than quoting a number over the phone.
How long does a paver project take?
Most paver patios and walkways take three to six weeks of construction. Driveways, retaining walls and drainage work add time, and so does demolition of thick existing concrete.
Do pavers need a permit?
A patio on grade usually does not. Retaining walls above a certain height, a driveway approach at the street and work that changes drainage often do, and the thresholds differ by city. We check with your building department before we price the job.
Can you pave over my existing concrete?
Sometimes, with thin pavers made for overlays, if the slab is sound and the added height works at doors and steps. A cracked or sinking slab should come out, because the pavers will follow whatever is under them.
How do I look after pavers?
Very little is needed. Sweep them, rinse them, and top up the joint sand if it washes out over the years. If one paver stains or settles it can be lifted and reset, which is the main advantage over poured concrete.
More Services in Sherman Oaks
Planning Guides
Before You Build in Sherman Oaks
Costs, materials and process notes from our own projects.
Pool Remodel Cost in Sherman Oaks: Plaster to Pipes
Pool remodels in Sherman Oaks run $18,000 to $55,000 depending on scope. Here is what each element costs, and why hillside pools above Ventura Boulevard price higher than the flats.
Read guideSherman Oaks Outdoor Kitchens: Costs & Permits
Sherman Oaks homeowners are adding outdoor kitchens to extend living space. Here's what you need to know about design, costs, and local requirements.
Read guideDriveway Design Ideas for California Homes
Your driveway is the first impression of your home. Explore modern driveway designs, materials, and patterns that elevate California curb appeal.
Read guideWhy Base Preparation Matters for Hardscape Projects
The base beneath your pavers determines whether they last 5 years or 50. Learn why proper base preparation is the most important part of any hardscape project.
Read guidePlanning Pavers in Sherman Oaks?
Sit down with your project manager and get an accurate estimate. We call you back within one business day.
Licensed, bonded & insured · CSLB license #1119054