Skip to main content
Side-yard patio with a fire bowl, lounge seating and turf joints at dusk
Design · Permit · Build

Paver & Hardscape Contractor in Beverly Hills

Paver patios, driveways and walls, built on a proper base by our own crews.

Licensed contractor
California general contractor, CSLB #1119054. Bonded and insured.
Typical cost
Paver patio and hardscape: from about $13,000.
Permits
Issued by the City of Beverly Hills. We handle the plans and the submittal.

Built for Beverly Hills Homes

Beverly Hills projects are judged as much on how the work is run as on how it finishes. The city enforces construction hours, staging and street use tightly, and neighbors notice everything. A clean, quiet, well-sequenced jobsite is part of the deliverable here, alongside the finish quality itself.

Trousdale Estates and the Hillside Area north of Sunset add hillside engineering on top of that.

Estate properties where finish quality, discretion and a clean jobsite matter as much as the design itself.

What to Plan For

Pavers last when the base is right. What you see is the top two or three inches. Underneath is excavation to the correct depth, a compacted base, a setting bed and an edge restraint that stops the field from spreading. That work is where a paver job is won or lost, and it is the part a low bid leaves out.

Water comes next. Hardscape changes where rain goes, so we set the slopes and add drains while the ground is open. Fixing drainage after the pavers are down means lifting them again.

The material is your choice. Concrete pavers, porcelain and natural stone such as travertine differ in look, in how hot they get underfoot and in price. A driveway needs a thicker paver and a deeper base than a patio. We bring samples and show the layout in 3D, so the pattern and the borders are settled before we order.

We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.

Permits in Beverly Hills: Beverly Hills permits independently with its own plan check. Single-family homes in the Central Area go through design review for street-visible changes; the Hillside Area has no design review process but has its own development standards. Standards for construction hours, staging and street use are strictly enforced, and hillside properties north of Sunset carry additional grading review.

Permit details checked September 2026 against City of Beverly Hills. Rules change, so we confirm them again for your parcel.

What We Build

  • Discreet jobsite and staging management
  • Estate-grade finish detailing
  • Paver patios and pool decks
  • Paver driveways and walkways
  • Concrete, porcelain and natural stone pavers
  • Excavation, compacted base and edge restraint
  • Drainage correction and grading
  • Retaining walls and seat walls
  • Steps, landings and planters
  • Fire pits with built-in seating
  • Artificial turf and turf joints
  • Low-voltage hardscape lighting

Local Conditions

What to Know in Beverly Hills

These local conditions change the scope, the schedule and the budget.

01

Trousdale Estates and Hillside Area parcels north of Sunset are hillside builds requiring engineered retaining

02

The Flats offer large level lots suited to full estate-scale outdoor programs

03

Construction staging and neighbor impact are tightly regulated and need planning up front

Areas we serve in Beverly Hills:Beverly Hills FlatsTrousdale EstatesHillside Area north of Sunset

Investment

What It Costs in Beverly Hills

Real Southern California price ranges, not teaser numbers.

Paver patio and hardscape

from about $13,000

What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved

Retaining walls

$60 to $150 per face foot

What moves it: height, whether the wall is engineered, material choice, drainage behind the wall, and access for equipment and materials

Artificial turf

from about $9,900

What moves it: area, turf grade, base depth, drainage, and any pet-specific infill

Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.

Get a line-item price for your Beverly Hills property

The Process

How We Work in Beverly Hills

01

Site Review

We measure the area, check soil, slope and drainage, and note access for equipment and materials.

02

Design & 3D

You see the layout, pattern, borders and material in 3D before anything is ordered.

03

Plans & Permits

Walls, driveway approaches and drainage work are drawn and permitted where your city requires it. In Beverly Hills that submittal goes to City of Beverly Hills Community Development Department, Building & Safety.

04

Demo & Excavation

Old concrete comes out and the area is dug to the depth the new base needs.

05

Base & Pavers

Base is placed and compacted in layers, then the setting bed, pavers, cuts and edge restraint.

06

Joints & Handover

Joints are filled and compacted, the surface is cleaned, and we walk the finished work with you.

Questions

What Beverly Hills Homeowners Ask

Who issues the permits for this work in Beverly Hills?

City of Beverly Hills Community Development Department, Building & Safety. Beverly Hills permits independently with its own plan check. Single-family homes in the Central Area go through design review for street-visible changes; the Hillside Area has no design review process but has its own development standards.

Standards for construction hours, staging and street use are strictly enforced, and hillside properties north of Sunset carry additional grading review. We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

What makes building in Beverly Hills different?

Estate properties where finish quality, discretion and a clean jobsite matter as much as the design itself. One local condition that shapes the work: Trousdale Estates and Hillside Area parcels north of Sunset are hillside builds requiring engineered retaining.

Which parts of Beverly Hills do you work in?

All of it, including Beverly Hills Flats, Trousdale Estates and Hillside Area north of Sunset. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

What does a paver or hardscape project cost in Beverly Hills?

Paver patio and hardscape: generally from about $13,000 across Southern California. What moves it is square footage, paver type, base preparation, drainage, and any steps or retaining involved. We give line-item pricing after seeing the site rather than quoting a number over the phone.

How long does a paver project take?

Most paver patios and walkways take three to six weeks of construction. Driveways, retaining walls and drainage work add time, and so does demolition of thick existing concrete.

Do pavers need a permit?

A patio on grade usually does not. Retaining walls above a certain height, a driveway approach at the street and work that changes drainage often do, and the thresholds differ by city. We check with your building department before we price the job.

Can you pave over my existing concrete?

Sometimes, with thin pavers made for overlays, if the slab is sound and the added height works at doors and steps. A cracked or sinking slab should come out, because the pavers will follow whatever is under them.

How do I look after pavers?

Very little is needed. Sweep them, rinse them, and top up the joint sand if it washes out over the years. If one paver stains or settles it can be lifted and reset, which is the main advantage over poured concrete.

Planning Pavers in Beverly Hills?

Sit down with your project manager and get an accurate estimate. We call you back within one business day.

Licensed, bonded & insured · CSLB license #1119054