Skip to main content
Artificial turf lawn framed by large-format pavers and olive trees
Design · Permit · Build

Paver & Hardscape Contractor in Santa Monica

Paver patios, driveways and walls, built on a proper base by our own crews.

Licensed contractor
California general contractor, CSLB #1119054. Bonded and insured.
Typical cost
Paver patio and hardscape: from about $13,000.
Permits
Issued by the City of Santa Monica. We handle the plans and the submittal.

Built for Santa Monica Homes

Working here means designing for a narrow lot with an alley behind it and neighbors close on both sides. We plan pool excavation and material staging around permit-parking blocks and the city's construction-hour limits, and we check early whether a property falls inside the coastal zone or is old enough that demolition triggers landmark review. Salt air also shapes which metals, fasteners and finishes we are willing to put outdoors.

Mostly flat, modest rectangular lots on a tight grid, many of them alley-loaded with shallow rear yards and close side-yard neighbors. Larger estate parcels appear north of Montana Avenue.

What to Plan For

Pavers last when the base is right. What you see is the top two or three inches. Underneath is excavation to the correct depth, a compacted base, a setting bed and an edge restraint that stops the field from spreading. That work is where a paver job is won or lost, and it is the part a low bid leaves out.

Water comes next. Hardscape changes where rain goes, so we set the slopes and add drains while the ground is open. Fixing drainage after the pavers are down means lifting them again.

The material is your choice. Concrete pavers, porcelain and natural stone such as travertine differ in look, in how hot they get underfoot and in price. A driveway needs a thicker paver and a deeper base than a patio. We bring samples and show the layout in 3D, so the pattern and the borders are settled before we order.

We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.

Permits in Santa Monica: Residential building, grading and swimming pool permits are issued by the city's own Building and Safety Division at the Permit Services Center, not by Los Angeles. Properties inside the coastal zone still need a coastal development permit from the California Coastal Commission, because the city has a certified Land Use Plan but not yet a fully certified Local Coastal Program; a memorandum of understanding with the Commission was signed in 2026 to complete it.

Any demolition application for a structure more than 40 years old is transmitted to the Landmarks Commission for landmark review before it can move forward. Review durations vary by project and by whether coastal or historic review applies.

Permit details checked September 2026 against City of Santa Monica. Rules change, so we confirm them again for your parcel.

What We Build

  • Coastal zone screening before design is finalized
  • Alley and crane-based pool access planning
  • Pre-demolition landmark review for older homes
  • Paver patios and pool decks
  • Paver driveways and walkways
  • Concrete, porcelain and natural stone pavers
  • Excavation, compacted base and edge restraint
  • Drainage correction and grading
  • Retaining walls and seat walls
  • Steps, landings and planters
  • Fire pits with built-in seating
  • Artificial turf and turf joints
  • Low-voltage hardscape lighting

Local Conditions

What to Know in Santa Monica

These local conditions change the scope, the schedule and the budget.

01

Parcels along the coastline, plus a small area on the eastern edge of the Pico Neighborhood, lie in the state-mapped liquefaction zone, which can push pool shells and ADU foundations toward deeper structural engineering.

02

Standard lots with rear alleys leave narrow side yards, so excavation spoils and gunite material typically move through the alley or over the house by crane.

03

Marine air within a mile of the water corrodes exposed fasteners, railings and equipment, so outdoor kitchens and pool gear get specified in stainless or powder-coated assemblies.

04

Housing stock from the 1920s through the 1940s often still carries undersized service panels and galvanized supply lines that must be upgraded before new outdoor loads are added.

Areas we serve in Santa Monica:North of MontanaSunset ParkOcean ParkWilmontMid-CityPico

Investment

What It Costs in Santa Monica

Real Southern California price ranges, not teaser numbers.

Paver patio and hardscape

from about $13,000

What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved

Retaining walls

$60 to $150 per face foot

What moves it: height, whether the wall is engineered, material choice, drainage behind the wall, and access for equipment and materials

Artificial turf

from about $9,900

What moves it: area, turf grade, base depth, drainage, and any pet-specific infill

Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.

Get a line-item price for your Santa Monica property

The Process

How We Work in Santa Monica

01

Site Review

We measure the area, check soil, slope and drainage, and note access for equipment and materials.

02

Design & 3D

You see the layout, pattern, borders and material in 3D before anything is ordered.

03

Plans & Permits

Walls, driveway approaches and drainage work are drawn and permitted where your city requires it. In Santa Monica that submittal goes to City of Santa Monica Building and Safety Division (Community Development Department).

04

Demo & Excavation

Old concrete comes out and the area is dug to the depth the new base needs.

05

Base & Pavers

Base is placed and compacted in layers, then the setting bed, pavers, cuts and edge restraint.

06

Joints & Handover

Joints are filled and compacted, the surface is cleaned, and we walk the finished work with you.

Questions

What Santa Monica Homeowners Ask

Who issues the permits for this work in Santa Monica?

City of Santa Monica Building and Safety Division (Community Development Department). Residential building, grading and swimming pool permits are issued by the city's own Building and Safety Division at the Permit Services Center, not by Los Angeles.

Properties inside the coastal zone still need a coastal development permit from the California Coastal Commission, because the city has a certified Land Use Plan but not yet a fully certified Local Coastal Program; a memorandum of understanding with the Commission was signed in 2026 to complete it.

Any demolition application for a structure more than 40 years old is transmitted to the Landmarks Commission for landmark review before it can move forward. Review durations vary by project and by whether coastal or historic review applies.

We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

What makes building in Santa Monica different?

Mostly flat, modest rectangular lots on a tight grid, many of them alley-loaded with shallow rear yards and close side-yard neighbors. Larger estate parcels appear north of Montana Avenue. One local condition that shapes the work: Parcels along the coastline, plus a small area on the eastern edge of the Pico Neighborhood, lie in the state-mapped liquefaction zone, which can push pool shells and ADU foundations toward deeper structural engineering.

Which parts of Santa Monica do you work in?

All of it, including North of Montana, Sunset Park, Ocean Park and Wilmont. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

What does a paver or hardscape project cost in Santa Monica?

Paver patio and hardscape: generally from about $13,000 across Southern California. What moves it is square footage, paver type, base preparation, drainage, and any steps or retaining involved. We give line-item pricing after seeing the site rather than quoting a number over the phone.

How long does a paver project take?

Most paver patios and walkways take three to six weeks of construction. Driveways, retaining walls and drainage work add time, and so does demolition of thick existing concrete.

Do pavers need a permit?

A patio on grade usually does not. Retaining walls above a certain height, a driveway approach at the street and work that changes drainage often do, and the thresholds differ by city. We check with your building department before we price the job.

Can you pave over my existing concrete?

Sometimes, with thin pavers made for overlays, if the slab is sound and the added height works at doors and steps. A cracked or sinking slab should come out, because the pavers will follow whatever is under them.

How do I look after pavers?

Very little is needed. Sweep them, rinse them, and top up the joint sand if it washes out over the years. If one paver stains or settles it can be lifted and reset, which is the main advantage over poured concrete.

Planning Pavers in Santa Monica?

Sit down with your project manager and get an accurate estimate. We call you back within one business day.

Licensed, bonded & insured · CSLB license #1119054