Skip to main content
Artificial turf lawn framed by large-format pavers and olive trees
Design · Permit · Build

Paver & Hardscape Contractor in Pacific Palisades

Paver patios, driveways and walls, built on a proper base by our own crews.

Licensed contractor
California general contractor, CSLB #1119054. Bonded and insured.
Typical cost
Paver patio and hardscape: from about $13,000.
Permits
Issued by LADBS. We handle the plans and the submittal.

Built for Pacific Palisades Homes

Building here now often sits alongside fire rebuilding, and the practical questions are about slope, access and utilities before they are about style. We verify whether a lot falls in the coastal zone, how hillside rules cap cut and fill, and whether soil export will require a haul route hearing.

On bluff and canyon parcels, caissons and shoring usually come before a pool or terrace can be framed at all.

A mix of flat, generous grid lots on the bluff-top plateau and steep canyon and hillside parcels with descending rear yards and long driveways.

What to Plan For

Pavers last when the base is right. What you see is the top two or three inches. Underneath is excavation to the correct depth, a compacted base, a setting bed and an edge restraint that stops the field from spreading. That work is where a paver job is won or lost, and it is the part a low bid leaves out.

Water comes next. Hardscape changes where rain goes, so we set the slopes and add drains while the ground is open. Fixing drainage after the pavers are down means lifting them again.

The material is your choice. Concrete pavers, porcelain and natural stone such as travertine differ in look, in how hot they get underfoot and in price. A driveway needs a thicker paver and a deeper base than a patio. We bring samples and show the layout in 3D, so the pattern and the borders are settled before we order.

We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.

Permits in Pacific Palisades: This is City of Los Angeles territory, so building, grading and pool permits come from LADBS, while discretionary coastal entitlements are handled by Los Angeles City Planning. Parcels inside the coastal zone generally require a coastal development permit, although post-fire executive orders let qualifying rebuilds bypass local Coastal Act review.

In the mapped dual permit jurisdiction area between the shoreline and the first public road, a separate California Coastal Commission permit is also required. Hillside grading is governed by the Baseline Hillside Ordinance (No. 184,802), and importing or exporting more than 1,000 cubic yards of earth in a hillside grading area requires a haul route hearing before the Board of Building and Safety Commissioners.

Nearly all of the community is mapped Very High Fire Hazard Severity Zone, bringing Chapter 7A ignition-resistant material requirements; fire rebuilds run through the city's dedicated rebuild permitting path and one-stop center, with durations varying by project.

Permit details checked September 2026 against LADBS, City of Los Angeles, LA City Planning and State of California. Rules change, so we confirm them again for your parcel.

What We Build

  • Haul route and grading quantity planning
  • Chapter 7A fire-hardened outdoor construction
  • Coastal zone entitlement coordination
  • Paver patios and pool decks
  • Paver driveways and walkways
  • Concrete, porcelain and natural stone pavers
  • Excavation, compacted base and edge restraint
  • Drainage correction and grading
  • Retaining walls and seat walls
  • Steps, landings and planters
  • Fire pits with built-in seating
  • Artificial turf and turf joints
  • Low-voltage hardscape lighting

Local Conditions

What to Know in Pacific Palisades

These local conditions change the scope, the schedule and the budget.

01

Steep pads above the canyons commonly need caissons, shotcrete shoring and retaining structures before a pool shell or level terrace is even possible.

02

The Castellammare and Via de las Olas bluffs have a long documented landslide history, and geotechnical review there governs foundation type, drainage and setback.

03

Fire-affected parcels can present altered soils, stripped slope vegetation and rebuilt service laterals, all of which change grading, drainage and utility tie-in scope.

04

Narrow canyon streets with few turnarounds limit truck size and force detailed staging plans for concrete, steel and soil export.

Areas we serve in Pacific Palisades:Huntington PalisadesThe Alphabet StreetsRustic CanyonCastellammareMarquez KnollsThe Highlands

Investment

What It Costs in Pacific Palisades

Real Southern California price ranges, not teaser numbers.

Paver patio and hardscape

from about $13,000

What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved

Retaining walls

$60 to $150 per face foot

What moves it: height, whether the wall is engineered, material choice, drainage behind the wall, and access for equipment and materials

Artificial turf

from about $9,900

What moves it: area, turf grade, base depth, drainage, and any pet-specific infill

Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.

Get a line-item price for your Pacific Palisades property

The Process

How We Work in Pacific Palisades

01

Site Review

We measure the area, check soil, slope and drainage, and note access for equipment and materials.

02

Design & 3D

You see the layout, pattern, borders and material in 3D before anything is ordered.

03

Plans & Permits

Walls, driveway approaches and drainage work are drawn and permitted where your city requires it. In Pacific Palisades that submittal goes to Los Angeles Department of Building and Safety (LADBS).

04

Demo & Excavation

Old concrete comes out and the area is dug to the depth the new base needs.

05

Base & Pavers

Base is placed and compacted in layers, then the setting bed, pavers, cuts and edge restraint.

06

Joints & Handover

Joints are filled and compacted, the surface is cleaned, and we walk the finished work with you.

Questions

What Pacific Palisades Homeowners Ask

Who issues the permits for this work in Pacific Palisades?

Los Angeles Department of Building and Safety (LADBS). This is City of Los Angeles territory, so building, grading and pool permits come from LADBS, while discretionary coastal entitlements are handled by Los Angeles City Planning. Parcels inside the coastal zone generally require a coastal development permit, although post-fire executive orders let qualifying rebuilds bypass local Coastal Act review.

In the mapped dual permit jurisdiction area between the shoreline and the first public road, a separate California Coastal Commission permit is also required. Hillside grading is governed by the Baseline Hillside Ordinance (No. 184,802), and importing or exporting more than 1,000 cubic yards of earth in a hillside grading area requires a haul route hearing before the Board of Building and Safety Commissioners.

Nearly all of the community is mapped Very High Fire Hazard Severity Zone, bringing Chapter 7A ignition-resistant material requirements; fire rebuilds run through the city's dedicated rebuild permitting path and one-stop center, with durations varying by project.

We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

What makes building in Pacific Palisades different?

A mix of flat, generous grid lots on the bluff-top plateau and steep canyon and hillside parcels with descending rear yards and long driveways. One local condition that shapes the work: Steep pads above the canyons commonly need caissons, shotcrete shoring and retaining structures before a pool shell or level terrace is even possible.

Which parts of Pacific Palisades do you work in?

All of it, including Huntington Palisades, The Alphabet Streets, Rustic Canyon and Castellammare. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

What does a paver or hardscape project cost in Pacific Palisades?

Paver patio and hardscape: generally from about $13,000 across Southern California. What moves it is square footage, paver type, base preparation, drainage, and any steps or retaining involved. We give line-item pricing after seeing the site rather than quoting a number over the phone.

How long does a paver project take?

Most paver patios and walkways take three to six weeks of construction. Driveways, retaining walls and drainage work add time, and so does demolition of thick existing concrete.

Do pavers need a permit?

A patio on grade usually does not. Retaining walls above a certain height, a driveway approach at the street and work that changes drainage often do, and the thresholds differ by city. We check with your building department before we price the job.

Can you pave over my existing concrete?

Sometimes, with thin pavers made for overlays, if the slab is sound and the added height works at doors and steps. A cracked or sinking slab should come out, because the pavers will follow whatever is under them.

How do I look after pavers?

Very little is needed. Sweep them, rinse them, and top up the joint sand if it washes out over the years. If one paver stains or settles it can be lifted and reset, which is the main advantage over poured concrete.

Planning Pavers in Pacific Palisades?

Sit down with your project manager and get an accurate estimate. We call you back within one business day.

Licensed, bonded & insured · CSLB license #1119054