
Paver & Hardscape Contractor in Bel Air
Paver patios, driveways and walls, built on a proper base by our own crews.
- Licensed contractor
- California general contractor, CSLB #1119054. Bonded and insured.
- Typical cost
- Paver patio and hardscape: from about $13,000.
- Permits
- Issued by LADBS. We handle the plans and the submittal.
Built for Bel Air Homes
The grading budget is a genuine design constraint here. The hillside district covering this community plan area caps total cut and fill per site, so a pool, a motor court and a level lawn all compete for the same cubic yards. Roads are narrow and winding, which limits truck size and dictates sequencing for concrete, steel and crane days.
Slope work usually starts with caissons and shoring long before anything looks like a backyard.
Large hillside and canyon parcels with steep slopes, limited flat buildable pad, long private driveways and substantial existing retaining infrastructure.
What to Plan For
Pavers last when the base is right. What you see is the top two or three inches. Underneath is excavation to the correct depth, a compacted base, a setting bed and an edge restraint that stops the field from spreading. That work is where a paver job is won or lost, and it is the part a low bid leaves out.
Water comes next. Hardscape changes where rain goes, so we set the slopes and add drains while the ground is open. Fixing drainage after the pavers are down means lifting them again.
The material is your choice. Concrete pavers, porcelain and natural stone such as travertine differ in look, in how hot they get underfoot and in price. A driveway needs a thicker paver and a deeper base than a patio. We bring samples and show the layout in 3D, so the pattern and the borders are settled before we order.
We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.
Permits in Bel Air: LADBS issues the building, grading and pool permits, as this is City of Los Angeles territory rather than a separate municipality. The Bel Air-Beverly Crest community plan area was added to the Hillside Construction Regulation supplemental use district effective March 22, 2017 (Ordinance No. 184,828), which caps grading at 6,000 cubic yards per site, adds hauling and construction activity standards, and limits exterior construction to weekdays between 8:00 a.m. and 6:00 p.m., with interior work also allowed on Saturdays during those hours.
Hauling is restricted to weekdays between 9:00 a.m. and 3:00 p.m. The Baseline Hillside Ordinance (No. 184,802) separately governs height, floor area and slope-based limits, and import or export of more than 1,000 cubic yards in a hillside grading area requires a haul route hearing before the Board of Building and Safety Commissioners.
Parcels along the Mulholland corridor also fall under the Mulholland Scenic Parkway Specific Plan, and private homeowner associations in gated tracts can add their own architectural review on top of city review.
Permit details checked September 2026 against LADBS and LA City Planning. Rules change, so we confirm them again for your parcel.
What We Build
- Grading quantity and haul route strategy
- Caisson, pile and shoring pool structures
- HOA architectural review submittals
- Paver patios and pool decks
- Paver driveways and walkways
- Concrete, porcelain and natural stone pavers
- Excavation, compacted base and edge restraint
- Drainage correction and grading
- Retaining walls and seat walls
- Steps, landings and planters
- Fire pits with built-in seating
- Artificial turf and turf joints
- Low-voltage hardscape lighting
Local Conditions
What to Know in Bel Air
These local conditions change the scope, the schedule and the budget.
A per-site grading cap means cut and fill for a pool, a motor court and a level lawn all draw from the same limited quantity, so earthwork is designed before aesthetics are settled.
Slope construction typically begins with caissons, tiebacks and shoring, and pool shells on descending lots often sit on structural piles rather than native grade.
Narrow, winding roads with tight radii limit truck and crane size, so concrete pours and steel deliveries are sequenced around access rather than convenience.
Excavation frequently reaches shale and bedrock at shallow depth, which slows digging and increases export volume against a fixed grading allowance.
Investment
What It Costs in Bel Air
Real Southern California price ranges, not teaser numbers.
Paver patio and hardscape
from about $13,000
What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved
Retaining walls
$60 to $150 per face foot
What moves it: height, whether the wall is engineered, material choice, drainage behind the wall, and access for equipment and materials
Artificial turf
from about $9,900
What moves it: area, turf grade, base depth, drainage, and any pet-specific infill
Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.
Get a line-item price for your Bel Air propertyThe Process
How We Work in Bel Air
Site Review
We measure the area, check soil, slope and drainage, and note access for equipment and materials.
Design & 3D
You see the layout, pattern, borders and material in 3D before anything is ordered.
Plans & Permits
Walls, driveway approaches and drainage work are drawn and permitted where your city requires it. In Bel Air that submittal goes to Los Angeles Department of Building and Safety (LADBS).
Demo & Excavation
Old concrete comes out and the area is dug to the depth the new base needs.
Base & Pavers
Base is placed and compacted in layers, then the setting bed, pavers, cuts and edge restraint.
Joints & Handover
Joints are filled and compacted, the surface is cleaned, and we walk the finished work with you.
Questions
What Bel Air Homeowners Ask
Who issues the permits for this work in Bel Air?
Los Angeles Department of Building and Safety (LADBS). LADBS issues the building, grading and pool permits, as this is City of Los Angeles territory rather than a separate municipality. The Bel Air-Beverly Crest community plan area was added to the Hillside Construction Regulation supplemental use district effective March 22, 2017 (Ordinance No. 184,828), which caps grading at 6,000 cubic yards per site, adds hauling and construction activity standards, and limits exterior construction to weekdays between 8:00 a.m. and 6:00 p.m., with interior work also allowed on Saturdays during those hours.
Hauling is restricted to weekdays between 9:00 a.m. and 3:00 p.m. The Baseline Hillside Ordinance (No. 184,802) separately governs height, floor area and slope-based limits, and import or export of more than 1,000 cubic yards in a hillside grading area requires a haul route hearing before the Board of Building and Safety Commissioners.
Parcels along the Mulholland corridor also fall under the Mulholland Scenic Parkway Specific Plan, and private homeowner associations in gated tracts can add their own architectural review on top of city review. We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.
What makes building in Bel Air different?
Large hillside and canyon parcels with steep slopes, limited flat buildable pad, long private driveways and substantial existing retaining infrastructure. One local condition that shapes the work: A per-site grading cap means cut and fill for a pool, a motor court and a level lawn all draw from the same limited quantity, so earthwork is designed before aesthetics are settled.
Which parts of Bel Air do you work in?
All of it, including East Gate Bel Air, West Gate Bel Air, Upper Bel Air and Stone Canyon. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.
What does a paver or hardscape project cost in Bel Air?
Paver patio and hardscape: generally from about $13,000 across Southern California. What moves it is square footage, paver type, base preparation, drainage, and any steps or retaining involved. We give line-item pricing after seeing the site rather than quoting a number over the phone.
How long does a paver project take?
Most paver patios and walkways take three to six weeks of construction. Driveways, retaining walls and drainage work add time, and so does demolition of thick existing concrete.
Do pavers need a permit?
A patio on grade usually does not. Retaining walls above a certain height, a driveway approach at the street and work that changes drainage often do, and the thresholds differ by city. We check with your building department before we price the job.
Can you pave over my existing concrete?
Sometimes, with thin pavers made for overlays, if the slab is sound and the added height works at doors and steps. A cracked or sinking slab should come out, because the pavers will follow whatever is under them.
How do I look after pavers?
Very little is needed. Sweep them, rinse them, and top up the joint sand if it washes out over the years. If one paver stains or settles it can be lifted and reset, which is the main advantage over poured concrete.
More Services in Bel Air
Planning Guides
Before You Build in Bel Air
Costs, materials and process notes from our own projects.
Driveway Design Ideas for California Homes
Your driveway is the first impression of your home. Explore modern driveway designs, materials, and patterns that elevate California curb appeal.
Read guideWhy Base Preparation Matters for Hardscape Projects
The base beneath your pavers determines whether they last 5 years or 50. Learn why proper base preparation is the most important part of any hardscape project.
Read guideOutdoor Stair Design: Safe and Beautiful Grade Changes
Outdoor stairs connect different levels of your landscape while adding architectural interest. Learn about materials, code requirements, and design options.
Read guideDecorative Concrete Options: Beyond Plain Gray
Modern decorative concrete offers endless design possibilities. Explore stamping, staining, exposed aggregate, and other techniques that transform ordinary concrete.
Read guidePlanning Pavers in Bel Air?
Sit down with your project manager and get an accurate estimate. We call you back within one business day.
Licensed, bonded & insured · CSLB license #1119054