Skip to main content
Side-yard patio with a fire bowl, lounge seating and turf joints at dusk
Design · Permit · Build

Paver & Hardscape Contractor in Brentwood

Paver patios, driveways and walls, built on a proper base by our own crews.

Licensed contractor
California general contractor, CSLB #1119054. Bonded and insured.
Typical cost
Paver patio and hardscape: from about $13,000.
Permits
Issued by LADBS. We handle the plans and the submittal.

Built for Brentwood Homes

There are really two build conditions here. On the flat park-district streets we work around mature protected sycamores and oaks whose root zones decide where a pool shell can land. Up in Mandeville, Kenter and Sullivan canyons, single-lane roads and fire-zone construction requirements drive the schedule, and exporting more than 1,000 cubic yards of soil from a hillside grading area requires a haul route approved at a public hearing. We price both realities separately.

Broad, level, deeply landscaped lots in the flat park district, transitioning to long, narrow canyon parcels with steep side slopes and single-lane frontage.

What to Plan For

Pavers last when the base is right. What you see is the top two or three inches. Underneath is excavation to the correct depth, a compacted base, a setting bed and an edge restraint that stops the field from spreading. That work is where a paver job is won or lost, and it is the part a low bid leaves out.

Water comes next. Hardscape changes where rain goes, so we set the slopes and add drains while the ground is open. Fixing drainage after the pavers are down means lifting them again.

The material is your choice. Concrete pavers, porcelain and natural stone such as travertine differ in look, in how hot they get underfoot and in price. A driveway needs a thicker paver and a deeper base than a patio. We bring samples and show the layout in 3D, so the pattern and the borders are settled before we order.

We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.

Permits in Brentwood: Permits are issued by LADBS, since this is part of the City of Los Angeles rather than a separate city. Hillside lots north of Sunset fall under the Baseline Hillside Ordinance (No. 184,802) for height, floor area and grading limits, and import or export of more than 1,000 cubic yards in a hillside grading area triggers a haul route hearing before the Board of Building and Safety Commissioners.

The canyons are mapped Very High Fire Hazard Severity Zone, which brings Chapter 7A ignition-resistant construction and brush clearance obligations. The city's protected tree and shrub ordinance (No. 186,873) covers oak, western sycamore, Southern California black walnut and California bay laurel, plus toyon and Mexican elderberry.

Permit details checked September 2026 against LADBS, LA City Clerk, LAFD and City of Los Angeles. Rules change, so we confirm them again for your parcel.

What We Build

  • Protected tree root-zone planning
  • Canyon access, staging and haul route logistics
  • Paver patios and pool decks
  • Paver driveways and walkways
  • Concrete, porcelain and natural stone pavers
  • Excavation, compacted base and edge restraint
  • Drainage correction and grading
  • Retaining walls and seat walls
  • Steps, landings and planters
  • Fire pits with built-in seating
  • Artificial turf and turf joints
  • Low-voltage hardscape lighting

Local Conditions

What to Know in Brentwood

These local conditions change the scope, the schedule and the budget.

01

Flat park-district lots carry mature sycamores, oaks and walnuts whose protected root zones frequently dictate where a pool shell, footings and utility trenching can go.

02

Canyon properties north of Sunset sit on single-lane roads with limited turnarounds, so concrete, crane and soil-export days have to be reserved well in advance.

03

Soils shift from expansive clay to shallow bedrock within a few hundred feet, which changes excavation cost and foundation design substantially between neighboring lots.

04

Mid-century canyon homes often retain original service panels and galvanized water lines that need upgrading before pool equipment, spa heaters and outdoor kitchens are added.

Areas we serve in Brentwood:Brentwood ParkMandeville CanyonKenter CanyonSullivan CanyonBrentwood GlenCrestwood Hills

Investment

What It Costs in Brentwood

Real Southern California price ranges, not teaser numbers.

Paver patio and hardscape

from about $13,000

What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved

Retaining walls

$60 to $150 per face foot

What moves it: height, whether the wall is engineered, material choice, drainage behind the wall, and access for equipment and materials

Artificial turf

from about $9,900

What moves it: area, turf grade, base depth, drainage, and any pet-specific infill

Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.

Get a line-item price for your Brentwood property

The Process

How We Work in Brentwood

01

Site Review

We measure the area, check soil, slope and drainage, and note access for equipment and materials.

02

Design & 3D

You see the layout, pattern, borders and material in 3D before anything is ordered.

03

Plans & Permits

Walls, driveway approaches and drainage work are drawn and permitted where your city requires it. In Brentwood that submittal goes to Los Angeles Department of Building and Safety (LADBS).

04

Demo & Excavation

Old concrete comes out and the area is dug to the depth the new base needs.

05

Base & Pavers

Base is placed and compacted in layers, then the setting bed, pavers, cuts and edge restraint.

06

Joints & Handover

Joints are filled and compacted, the surface is cleaned, and we walk the finished work with you.

Questions

What Brentwood Homeowners Ask

Who issues the permits for this work in Brentwood?

Los Angeles Department of Building and Safety (LADBS). Permits are issued by LADBS, since this is part of the City of Los Angeles rather than a separate city. Hillside lots north of Sunset fall under the Baseline Hillside Ordinance (No. 184,802) for height, floor area and grading limits, and import or export of more than 1,000 cubic yards in a hillside grading area triggers a haul route hearing before the Board of Building and Safety Commissioners.

The canyons are mapped Very High Fire Hazard Severity Zone, which brings Chapter 7A ignition-resistant construction and brush clearance obligations. The city's protected tree and shrub ordinance (No. 186,873) covers oak, western sycamore, Southern California black walnut and California bay laurel, plus toyon and Mexican elderberry.

We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

What makes building in Brentwood different?

Broad, level, deeply landscaped lots in the flat park district, transitioning to long, narrow canyon parcels with steep side slopes and single-lane frontage. One local condition that shapes the work: Flat park-district lots carry mature sycamores, oaks and walnuts whose protected root zones frequently dictate where a pool shell, footings and utility trenching can go.

Which parts of Brentwood do you work in?

All of it, including Brentwood Park, Mandeville Canyon, Kenter Canyon and Sullivan Canyon. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

What does a paver or hardscape project cost in Brentwood?

Paver patio and hardscape: generally from about $13,000 across Southern California. What moves it is square footage, paver type, base preparation, drainage, and any steps or retaining involved. We give line-item pricing after seeing the site rather than quoting a number over the phone.

How long does a paver project take?

Most paver patios and walkways take three to six weeks of construction. Driveways, retaining walls and drainage work add time, and so does demolition of thick existing concrete.

Do pavers need a permit?

A patio on grade usually does not. Retaining walls above a certain height, a driveway approach at the street and work that changes drainage often do, and the thresholds differ by city. We check with your building department before we price the job.

Can you pave over my existing concrete?

Sometimes, with thin pavers made for overlays, if the slab is sound and the added height works at doors and steps. A cracked or sinking slab should come out, because the pavers will follow whatever is under them.

How do I look after pavers?

Very little is needed. Sweep them, rinse them, and top up the joint sand if it washes out over the years. If one paver stains or settles it can be lifted and reset, which is the main advantage over poured concrete.

Planning Pavers in Brentwood?

Sit down with your project manager and get an accurate estimate. We call you back within one business day.

Licensed, bonded & insured · CSLB license #1119054