
Patio Cover & Pergola Contractor in Brentwood
Patio covers and pergolas, engineered, permitted and built by our own crews.
- Licensed contractor
- California general contractor, CSLB #1119054. Bonded and insured.
- Typical cost
- Pergola and shade structure: from about $9,500.
- Permits
- Issued by LADBS. We handle the plans and the submittal.
Built for Brentwood Homes
There are really two build conditions here. On the flat park-district streets we work around mature protected sycamores and oaks whose root zones decide where a pool shell can land. Up in Mandeville, Kenter and Sullivan canyons, single-lane roads and fire-zone construction requirements drive the schedule, and exporting more than 1,000 cubic yards of soil from a hillside grading area requires a haul route approved at a public hearing. We price both realities separately.
Broad, level, deeply landscaped lots in the flat park district, transitioning to long, narrow canyon parcels with steep side slopes and single-lane frontage.
What to Plan For
A patio cover is a structure, and it is designed like one. Attached to the house, it has to tie into the existing framing properly. Freestanding, it stands on its own footings. Either way the span, the posts and the footings are sized for the roof it carries, and that is what a building department reviews.
The roof decides how the space gets used. An open pergola filters the sun and keeps the sky. A solid roof gives real shade and shelter from rain. A louvered roof opens and closes, so you can have both. Wood, aluminum and steel each look and age differently, and we show you the options in 3D against your own house.
It is rarely built alone. Lighting, fans and heaters need power run to the structure, and the patio underneath often gets rebuilt at the same time. Planning them as one project means the posts land where the paving and the furniture want them.
We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.
Permits in Brentwood: Permits are issued by LADBS, since this is part of the City of Los Angeles rather than a separate city. Hillside lots north of Sunset fall under the Baseline Hillside Ordinance (No. 184,802) for height, floor area and grading limits, and import or export of more than 1,000 cubic yards in a hillside grading area triggers a haul route hearing before the Board of Building and Safety Commissioners.
The canyons are mapped Very High Fire Hazard Severity Zone, which brings Chapter 7A ignition-resistant construction and brush clearance obligations. The city's protected tree and shrub ordinance (No. 186,873) covers oak, western sycamore, Southern California black walnut and California bay laurel, plus toyon and Mexican elderberry.
Permit details checked September 2026 against LADBS, LA City Clerk, LAFD and City of Los Angeles. Rules change, so we confirm them again for your parcel.
What We Build
- Protected tree root-zone planning
- Canyon access, staging and haul route logistics
- Attached patio covers
- Freestanding pergolas and pavilions
- Louvered roof systems
- Solid roof covers
- Wood, aluminum and steel structures
- Engineered posts, beams and footings
- Lighting, fans and heaters, wired in
- Covers over outdoor kitchens and dining
- Paver or concrete patios beneath
- Plans, engineering and permits
Local Conditions
What to Know in Brentwood
These local conditions change the scope, the schedule and the budget.
Flat park-district lots carry mature sycamores, oaks and walnuts whose protected root zones frequently dictate where a pool shell, footings and utility trenching can go.
Canyon properties north of Sunset sit on single-lane roads with limited turnarounds, so concrete, crane and soil-export days have to be reserved well in advance.
Soils shift from expansive clay to shallow bedrock within a few hundred feet, which changes excavation cost and foundation design substantially between neighboring lots.
Mid-century canyon homes often retain original service panels and galvanized water lines that need upgrading before pool equipment, spa heaters and outdoor kitchens are added.
Investment
What It Costs in Brentwood
Real Southern California price ranges, not teaser numbers.
Pergola and shade structure
from about $9,500
What moves it: span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating
Paver patio and hardscape
from about $13,000
What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved
Landscape and architectural lighting
$3,000 to $12,000
What moves it: number of fixtures, transformer and cable runs, fixture quality, and whether the system is put on smart control
Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.
Get a line-item price for your Brentwood propertyThe Process
How We Work in Brentwood
Site Review
We measure the patio and the house, check where posts and footings can go, and note sun and sight lines.
Design & 3D
You see the cover in 3D on your own house, open, solid or louvered, in the material you choose.
Plans & Permits
The structure is drawn and engineered, and submitted for a permit where your city requires one. In Brentwood that submittal goes to Los Angeles Department of Building and Safety (LADBS).
Footings & Posts
Footings are dug and poured, then posts are set plumb and anchored.
Frame & Roof
Beams, rafters and the roof system go on, with power run for lighting, fans and heaters.
Finish & Handover
Stain, paint or powder coat, final electrical, inspection where one applies, and a walkthrough.
Questions
What Brentwood Homeowners Ask
Who issues the permits for this work in Brentwood?
Los Angeles Department of Building and Safety (LADBS). Permits are issued by LADBS, since this is part of the City of Los Angeles rather than a separate city. Hillside lots north of Sunset fall under the Baseline Hillside Ordinance (No. 184,802) for height, floor area and grading limits, and import or export of more than 1,000 cubic yards in a hillside grading area triggers a haul route hearing before the Board of Building and Safety Commissioners.
The canyons are mapped Very High Fire Hazard Severity Zone, which brings Chapter 7A ignition-resistant construction and brush clearance obligations. The city's protected tree and shrub ordinance (No. 186,873) covers oak, western sycamore, Southern California black walnut and California bay laurel, plus toyon and Mexican elderberry.
We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.
What makes building in Brentwood different?
Broad, level, deeply landscaped lots in the flat park district, transitioning to long, narrow canyon parcels with steep side slopes and single-lane frontage. One local condition that shapes the work: Flat park-district lots carry mature sycamores, oaks and walnuts whose protected root zones frequently dictate where a pool shell, footings and utility trenching can go.
Which parts of Brentwood do you work in?
All of it, including Brentwood Park, Mandeville Canyon, Kenter Canyon and Sullivan Canyon. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.
What does a patio cover or pergola cost in Brentwood?
Pergola and shade structure: generally from about $9,500 across Southern California. What moves it is span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating. We give line-item pricing after seeing the site rather than quoting a number over the phone.
Do I need a permit for a patio cover or pergola?
Usually yes for a cover attached to the house or one with a solid roof. Small freestanding pergolas are treated differently from city to city, and adding electrical brings its own permit. We check the rule with your building department before we price the job.
Wood, aluminum or a louvered roof?
Wood is warm and can be shaped to match almost any house, and it needs refinishing over the years. Aluminum needs very little upkeep and suits a clean, modern look. A louvered roof costs more and lets you open the space to the sky or close it for shade and rain.
Can it have lights, a fan and heaters?
Yes. They are far cleaner to add when they are planned, because the wiring runs inside the posts and beams. Adding them later usually means surface conduit.
How long does a patio cover take?
The build itself is short compared with the planning. Engineering and the plan review in your city usually set the schedule, so we give you a real timeline once we know which review your project needs.
More Services in Brentwood
Planning Guides
Before You Build in Brentwood
Costs, materials and process notes from our own projects.
Whole-Home Remodel Sequencing: What to Do First
A whole-home remodel done in the wrong order costs 15 to 25 percent more. Here is the correct sequence, from structural and roof through to paint, and why each stage has to precede the next.
Read guideIndoor-Outdoor Living Conversions in Southern California
A 16-foot multi-slide door runs $18,000 to $45,000 installed. Here is how the full indoor-outdoor conversion works, from structural header to flush threshold to covered patio tie-in.
Read guideTarzana Outdoor Living: Costs by Lot Type
Tarzana backyards run hot and deep. A working outdoor living build here (shade, hardscape, kitchen, lighting) typically lands between $85,000 and $220,000, and the ground drives most of the number.
Read guidePorter Ranch Backyards: Wind, Slope and Fire Zones
A full backyard transformation in Porter Ranch runs $95,000 to $280,000. Wind exposure, slope, HOA review and fire-zone material rules shape the design before anything about style enters the conversation.
Read guidePlanning a Patio Cover in Brentwood?
Sit down with your project manager and get an accurate estimate. We call you back within one business day.
Licensed, bonded & insured · CSLB license #1119054