Skip to main content
Aerial view of a backyard with a pergola, outdoor kitchen, artificial turf and large pavers
Design · Permit · Build

Patio Cover & Pergola Contractor in Pacific Palisades

Patio covers and pergolas, engineered, permitted and built by our own crews.

Licensed contractor
California general contractor, CSLB #1119054. Bonded and insured.
Typical cost
Pergola and shade structure: from about $9,500.
Permits
Issued by LADBS. We handle the plans and the submittal.

Built for Pacific Palisades Homes

Building here now often sits alongside fire rebuilding, and the practical questions are about slope, access and utilities before they are about style. We verify whether a lot falls in the coastal zone, how hillside rules cap cut and fill, and whether soil export will require a haul route hearing.

On bluff and canyon parcels, caissons and shoring usually come before a pool or terrace can be framed at all.

A mix of flat, generous grid lots on the bluff-top plateau and steep canyon and hillside parcels with descending rear yards and long driveways.

What to Plan For

A patio cover is a structure, and it is designed like one. Attached to the house, it has to tie into the existing framing properly. Freestanding, it stands on its own footings. Either way the span, the posts and the footings are sized for the roof it carries, and that is what a building department reviews.

The roof decides how the space gets used. An open pergola filters the sun and keeps the sky. A solid roof gives real shade and shelter from rain. A louvered roof opens and closes, so you can have both. Wood, aluminum and steel each look and age differently, and we show you the options in 3D against your own house.

It is rarely built alone. Lighting, fans and heaters need power run to the structure, and the patio underneath often gets rebuilt at the same time. Planning them as one project means the posts land where the paving and the furniture want them.

We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.

Permits in Pacific Palisades: This is City of Los Angeles territory, so building, grading and pool permits come from LADBS, while discretionary coastal entitlements are handled by Los Angeles City Planning. Parcels inside the coastal zone generally require a coastal development permit, although post-fire executive orders let qualifying rebuilds bypass local Coastal Act review.

In the mapped dual permit jurisdiction area between the shoreline and the first public road, a separate California Coastal Commission permit is also required. Hillside grading is governed by the Baseline Hillside Ordinance (No. 184,802), and importing or exporting more than 1,000 cubic yards of earth in a hillside grading area requires a haul route hearing before the Board of Building and Safety Commissioners.

Nearly all of the community is mapped Very High Fire Hazard Severity Zone, bringing Chapter 7A ignition-resistant material requirements; fire rebuilds run through the city's dedicated rebuild permitting path and one-stop center, with durations varying by project.

Permit details checked September 2026 against LADBS, City of Los Angeles, LA City Planning and State of California. Rules change, so we confirm them again for your parcel.

What We Build

  • Haul route and grading quantity planning
  • Chapter 7A fire-hardened outdoor construction
  • Coastal zone entitlement coordination
  • Attached patio covers
  • Freestanding pergolas and pavilions
  • Louvered roof systems
  • Solid roof covers
  • Wood, aluminum and steel structures
  • Engineered posts, beams and footings
  • Lighting, fans and heaters, wired in
  • Covers over outdoor kitchens and dining
  • Paver or concrete patios beneath
  • Plans, engineering and permits

Local Conditions

What to Know in Pacific Palisades

These local conditions change the scope, the schedule and the budget.

01

Steep pads above the canyons commonly need caissons, shotcrete shoring and retaining structures before a pool shell or level terrace is even possible.

02

The Castellammare and Via de las Olas bluffs have a long documented landslide history, and geotechnical review there governs foundation type, drainage and setback.

03

Fire-affected parcels can present altered soils, stripped slope vegetation and rebuilt service laterals, all of which change grading, drainage and utility tie-in scope.

04

Narrow canyon streets with few turnarounds limit truck size and force detailed staging plans for concrete, steel and soil export.

Areas we serve in Pacific Palisades:Huntington PalisadesThe Alphabet StreetsRustic CanyonCastellammareMarquez KnollsThe Highlands

Investment

What It Costs in Pacific Palisades

Real Southern California price ranges, not teaser numbers.

Pergola and shade structure

from about $9,500

What moves it: span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating

Paver patio and hardscape

from about $13,000

What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved

Landscape and architectural lighting

$3,000 to $12,000

What moves it: number of fixtures, transformer and cable runs, fixture quality, and whether the system is put on smart control

Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.

Get a line-item price for your Pacific Palisades property

The Process

How We Work in Pacific Palisades

01

Site Review

We measure the patio and the house, check where posts and footings can go, and note sun and sight lines.

02

Design & 3D

You see the cover in 3D on your own house, open, solid or louvered, in the material you choose.

03

Plans & Permits

The structure is drawn and engineered, and submitted for a permit where your city requires one. In Pacific Palisades that submittal goes to Los Angeles Department of Building and Safety (LADBS).

04

Footings & Posts

Footings are dug and poured, then posts are set plumb and anchored.

05

Frame & Roof

Beams, rafters and the roof system go on, with power run for lighting, fans and heaters.

06

Finish & Handover

Stain, paint or powder coat, final electrical, inspection where one applies, and a walkthrough.

Questions

What Pacific Palisades Homeowners Ask

Who issues the permits for this work in Pacific Palisades?

Los Angeles Department of Building and Safety (LADBS). This is City of Los Angeles territory, so building, grading and pool permits come from LADBS, while discretionary coastal entitlements are handled by Los Angeles City Planning. Parcels inside the coastal zone generally require a coastal development permit, although post-fire executive orders let qualifying rebuilds bypass local Coastal Act review.

In the mapped dual permit jurisdiction area between the shoreline and the first public road, a separate California Coastal Commission permit is also required. Hillside grading is governed by the Baseline Hillside Ordinance (No. 184,802), and importing or exporting more than 1,000 cubic yards of earth in a hillside grading area requires a haul route hearing before the Board of Building and Safety Commissioners.

Nearly all of the community is mapped Very High Fire Hazard Severity Zone, bringing Chapter 7A ignition-resistant material requirements; fire rebuilds run through the city's dedicated rebuild permitting path and one-stop center, with durations varying by project.

We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

What makes building in Pacific Palisades different?

A mix of flat, generous grid lots on the bluff-top plateau and steep canyon and hillside parcels with descending rear yards and long driveways. One local condition that shapes the work: Steep pads above the canyons commonly need caissons, shotcrete shoring and retaining structures before a pool shell or level terrace is even possible.

Which parts of Pacific Palisades do you work in?

All of it, including Huntington Palisades, The Alphabet Streets, Rustic Canyon and Castellammare. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

What does a patio cover or pergola cost in Pacific Palisades?

Pergola and shade structure: generally from about $9,500 across Southern California. What moves it is span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating. We give line-item pricing after seeing the site rather than quoting a number over the phone.

Do I need a permit for a patio cover or pergola?

Usually yes for a cover attached to the house or one with a solid roof. Small freestanding pergolas are treated differently from city to city, and adding electrical brings its own permit. We check the rule with your building department before we price the job.

Wood, aluminum or a louvered roof?

Wood is warm and can be shaped to match almost any house, and it needs refinishing over the years. Aluminum needs very little upkeep and suits a clean, modern look. A louvered roof costs more and lets you open the space to the sky or close it for shade and rain.

Can it have lights, a fan and heaters?

Yes. They are far cleaner to add when they are planned, because the wiring runs inside the posts and beams. Adding them later usually means surface conduit.

How long does a patio cover take?

The build itself is short compared with the planning. Engineering and the plan review in your city usually set the schedule, so we give you a real timeline once we know which review your project needs.

Planning a Patio Cover in Pacific Palisades?

Sit down with your project manager and get an accurate estimate. We call you back within one business day.

Licensed, bonded & insured · CSLB license #1119054