Skip to main content
Aerial view of a backyard with a pergola, outdoor kitchen, artificial turf and large pavers
Design · Permit · Build

Patio Cover & Pergola Contractor in Beverly Hills

Patio covers and pergolas, engineered, permitted and built by our own crews.

Licensed contractor
California general contractor, CSLB #1119054. Bonded and insured.
Typical cost
Pergola and shade structure: from about $9,500.
Permits
Issued by the City of Beverly Hills. We handle the plans and the submittal.

Built for Beverly Hills Homes

Beverly Hills projects are judged as much on how the work is run as on how it finishes. The city enforces construction hours, staging and street use tightly, and neighbors notice everything. A clean, quiet, well-sequenced jobsite is part of the deliverable here, alongside the finish quality itself.

Trousdale Estates and the Hillside Area north of Sunset add hillside engineering on top of that.

Estate properties where finish quality, discretion and a clean jobsite matter as much as the design itself.

What to Plan For

A patio cover is a structure, and it is designed like one. Attached to the house, it has to tie into the existing framing properly. Freestanding, it stands on its own footings. Either way the span, the posts and the footings are sized for the roof it carries, and that is what a building department reviews.

The roof decides how the space gets used. An open pergola filters the sun and keeps the sky. A solid roof gives real shade and shelter from rain. A louvered roof opens and closes, so you can have both. Wood, aluminum and steel each look and age differently, and we show you the options in 3D against your own house.

It is rarely built alone. Lighting, fans and heaters need power run to the structure, and the patio underneath often gets rebuilt at the same time. Planning them as one project means the posts land where the paving and the furniture want them.

We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.

Permits in Beverly Hills: Beverly Hills permits independently with its own plan check. Single-family homes in the Central Area go through design review for street-visible changes; the Hillside Area has no design review process but has its own development standards. Standards for construction hours, staging and street use are strictly enforced, and hillside properties north of Sunset carry additional grading review.

Permit details checked September 2026 against City of Beverly Hills. Rules change, so we confirm them again for your parcel.

What We Build

  • Discreet jobsite and staging management
  • Estate-grade finish detailing
  • Attached patio covers
  • Freestanding pergolas and pavilions
  • Louvered roof systems
  • Solid roof covers
  • Wood, aluminum and steel structures
  • Engineered posts, beams and footings
  • Lighting, fans and heaters, wired in
  • Covers over outdoor kitchens and dining
  • Paver or concrete patios beneath
  • Plans, engineering and permits

Local Conditions

What to Know in Beverly Hills

These local conditions change the scope, the schedule and the budget.

01

Trousdale Estates and Hillside Area parcels north of Sunset are hillside builds requiring engineered retaining

02

The Flats offer large level lots suited to full estate-scale outdoor programs

03

Construction staging and neighbor impact are tightly regulated and need planning up front

Areas we serve in Beverly Hills:Beverly Hills FlatsTrousdale EstatesHillside Area north of Sunset

Investment

What It Costs in Beverly Hills

Real Southern California price ranges, not teaser numbers.

Pergola and shade structure

from about $9,500

What moves it: span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating

Paver patio and hardscape

from about $13,000

What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved

Landscape and architectural lighting

$3,000 to $12,000

What moves it: number of fixtures, transformer and cable runs, fixture quality, and whether the system is put on smart control

Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.

Get a line-item price for your Beverly Hills property

The Process

How We Work in Beverly Hills

01

Site Review

We measure the patio and the house, check where posts and footings can go, and note sun and sight lines.

02

Design & 3D

You see the cover in 3D on your own house, open, solid or louvered, in the material you choose.

03

Plans & Permits

The structure is drawn and engineered, and submitted for a permit where your city requires one. In Beverly Hills that submittal goes to City of Beverly Hills Community Development Department, Building & Safety.

04

Footings & Posts

Footings are dug and poured, then posts are set plumb and anchored.

05

Frame & Roof

Beams, rafters and the roof system go on, with power run for lighting, fans and heaters.

06

Finish & Handover

Stain, paint or powder coat, final electrical, inspection where one applies, and a walkthrough.

Questions

What Beverly Hills Homeowners Ask

Who issues the permits for this work in Beverly Hills?

City of Beverly Hills Community Development Department, Building & Safety. Beverly Hills permits independently with its own plan check. Single-family homes in the Central Area go through design review for street-visible changes; the Hillside Area has no design review process but has its own development standards.

Standards for construction hours, staging and street use are strictly enforced, and hillside properties north of Sunset carry additional grading review. We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

What makes building in Beverly Hills different?

Estate properties where finish quality, discretion and a clean jobsite matter as much as the design itself. One local condition that shapes the work: Trousdale Estates and Hillside Area parcels north of Sunset are hillside builds requiring engineered retaining.

Which parts of Beverly Hills do you work in?

All of it, including Beverly Hills Flats, Trousdale Estates and Hillside Area north of Sunset. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

What does a patio cover or pergola cost in Beverly Hills?

Pergola and shade structure: generally from about $9,500 across Southern California. What moves it is span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating. We give line-item pricing after seeing the site rather than quoting a number over the phone.

Do I need a permit for a patio cover or pergola?

Usually yes for a cover attached to the house or one with a solid roof. Small freestanding pergolas are treated differently from city to city, and adding electrical brings its own permit. We check the rule with your building department before we price the job.

Wood, aluminum or a louvered roof?

Wood is warm and can be shaped to match almost any house, and it needs refinishing over the years. Aluminum needs very little upkeep and suits a clean, modern look. A louvered roof costs more and lets you open the space to the sky or close it for shade and rain.

Can it have lights, a fan and heaters?

Yes. They are far cleaner to add when they are planned, because the wiring runs inside the posts and beams. Adding them later usually means surface conduit.

How long does a patio cover take?

The build itself is short compared with the planning. Engineering and the plan review in your city usually set the schedule, so we give you a real timeline once we know which review your project needs.

Planning a Patio Cover in Beverly Hills?

Sit down with your project manager and get an accurate estimate. We call you back within one business day.

Licensed, bonded & insured · CSLB license #1119054