
Paver & Hardscape Contractor in Manhattan Beach
Paver patios, driveways and walls, built on a proper base by our own crews.
- Licensed contractor
- California general contractor, CSLB #1119054. Bonded and insured.
- Typical cost
- Paver patio and hardscape: from about $13,000.
- Permits
- Issued by the City of Manhattan Beach. We handle the plans and the submittal.
Built for Manhattan Beach Homes
Small lots, big ambitions. Sand Section parcels are typically narrow, with tight side setbacks, so a plunge pool, a spa, a roof deck and a stair tower all have to be resolved as one three-dimensional puzzle. Walk-street addresses have no vehicle frontage at all, which makes staging and material handling a design decision. We plan the coastal permit and the crane pick together.
Tight and narrow near the beach, with larger, steeply sloped view parcels up the hill and wider conventional lots inland.
What to Plan For
Pavers last when the base is right. What you see is the top two or three inches. Underneath is excavation to the correct depth, a compacted base, a setting bed and an edge restraint that stops the field from spreading. That work is where a paver job is won or lost, and it is the part a low bid leaves out.
Water comes next. Hardscape changes where rain goes, so we set the slopes and add drains while the ground is open. Fixing drainage after the pavers are down means lifting them again.
The material is your choice. Concrete pavers, porcelain and natural stone such as travertine differ in look, in how hot they get underfoot and in price. A driveway needs a thicker paver and a deeper base than a patio. We bring samples and show the layout in 3D, so the pattern and the borders are settled before we order.
We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.
Permits in Manhattan Beach: Building permits are issued by the Building and Safety Division of the City's Community Development Department, with applications accepted through the Citizen Self Service portal. Manhattan Beach has a certified Local Coastal Program, so the City itself issues Coastal Development Permits under the Coastal Development Permit Procedures chapter of that program, and certain decisions remain appealable to the California Coastal Commission.
Chapter A.96 of the Local Coastal Program decides whether a Coastal Zone project needs a Coastal Development Permit or qualifies for an exemption, so we check the City's Coastal Zone map first. Review time varies with scope, and a plan check expires if no permit is issued within 12 months of the application.
Permit details checked September 2026 against California Coastal Commission. Rules change, so we confirm them again for your parcel.
What We Build
- Coastal Development Permit submittals
- Shoring and caisson design in sand
- Crane and walk-street logistics
- Paver patios and pool decks
- Paver driveways and walkways
- Concrete, porcelain and natural stone pavers
- Excavation, compacted base and edge restraint
- Drainage correction and grading
- Retaining walls and seat walls
- Steps, landings and planters
- Fire pits with built-in seating
- Artificial turf and turf joints
- Low-voltage hardscape lighting
Local Conditions
What to Know in Manhattan Beach
These local conditions change the scope, the schedule and the budget.
Loose beach sand and dune deposits across much of the west side require engineered shoring, and often caissons, before excavation for a basement, pool or equipment vault.
Walk-street properties have no vehicle frontage, so gunite, steel, spoil and finish materials move by hand, conveyor or crane from an adjoining street.
Persistent salt air corrodes fasteners, equipment housings and unprotected metal, pushing specification toward marine-grade hardware and coated components.
Hill Section parcels fall steeply from street to rear, so outdoor living stacks vertically across decks and terraces instead of spreading out.
Investment
What It Costs in Manhattan Beach
Real Southern California price ranges, not teaser numbers.
Paver patio and hardscape
from about $13,000
What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved
Retaining walls
$60 to $150 per face foot
What moves it: height, whether the wall is engineered, material choice, drainage behind the wall, and access for equipment and materials
Artificial turf
from about $9,900
What moves it: area, turf grade, base depth, drainage, and any pet-specific infill
Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.
Get a line-item price for your Manhattan Beach propertyThe Process
How We Work in Manhattan Beach
Site Review
We measure the area, check soil, slope and drainage, and note access for equipment and materials.
Design & 3D
You see the layout, pattern, borders and material in 3D before anything is ordered.
Plans & Permits
Walls, driveway approaches and drainage work are drawn and permitted where your city requires it. In Manhattan Beach that submittal goes to City of Manhattan Beach Community Development Department, Building and Safety Division.
Demo & Excavation
Old concrete comes out and the area is dug to the depth the new base needs.
Base & Pavers
Base is placed and compacted in layers, then the setting bed, pavers, cuts and edge restraint.
Joints & Handover
Joints are filled and compacted, the surface is cleaned, and we walk the finished work with you.
Questions
What Manhattan Beach Homeowners Ask
Who issues the permits for this work in Manhattan Beach?
City of Manhattan Beach Community Development Department, Building and Safety Division. Building permits are issued by the Building and Safety Division of the City's Community Development Department, with applications accepted through the Citizen Self Service portal.
Manhattan Beach has a certified Local Coastal Program, so the City itself issues Coastal Development Permits under the Coastal Development Permit Procedures chapter of that program, and certain decisions remain appealable to the California Coastal Commission.
Chapter A.96 of the Local Coastal Program decides whether a Coastal Zone project needs a Coastal Development Permit or qualifies for an exemption, so we check the City's Coastal Zone map first. Review time varies with scope, and a plan check expires if no permit is issued within 12 months of the application.
We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.
What makes building in Manhattan Beach different?
Tight and narrow near the beach, with larger, steeply sloped view parcels up the hill and wider conventional lots inland. One local condition that shapes the work: Loose beach sand and dune deposits across much of the west side require engineered shoring, and often caissons, before excavation for a basement, pool or equipment vault.
Which parts of Manhattan Beach do you work in?
All of it, including Sand Section, Tree Section, Hill Section and El Porto. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.
What does a paver or hardscape project cost in Manhattan Beach?
Paver patio and hardscape: generally from about $13,000 across Southern California. What moves it is square footage, paver type, base preparation, drainage, and any steps or retaining involved. We give line-item pricing after seeing the site rather than quoting a number over the phone.
How long does a paver project take?
Most paver patios and walkways take three to six weeks of construction. Driveways, retaining walls and drainage work add time, and so does demolition of thick existing concrete.
Do pavers need a permit?
A patio on grade usually does not. Retaining walls above a certain height, a driveway approach at the street and work that changes drainage often do, and the thresholds differ by city. We check with your building department before we price the job.
Can you pave over my existing concrete?
Sometimes, with thin pavers made for overlays, if the slab is sound and the added height works at doors and steps. A cracked or sinking slab should come out, because the pavers will follow whatever is under them.
How do I look after pavers?
Very little is needed. Sweep them, rinse them, and top up the joint sand if it washes out over the years. If one paver stains or settles it can be lifted and reset, which is the main advantage over poured concrete.
More Services in Manhattan Beach
Pavers & Hardscape Nearby
Planning Guides
Before You Build in Manhattan Beach
Costs, materials and process notes from our own projects.
Manhattan Beach Backyard Costs on a 30-by-90 Lot
A Manhattan Beach ground-level yard runs $40,000 to $120,000 and a plunge pool $85,000 to $140,000. Access, sandy soil compaction, salt-air materials and roof-deck loads explained.
Read guideDriveway Design Ideas for California Homes
Your driveway is the first impression of your home. Explore modern driveway designs, materials, and patterns that elevate California curb appeal.
Read guideWhy Base Preparation Matters for Hardscape Projects
The base beneath your pavers determines whether they last 5 years or 50. Learn why proper base preparation is the most important part of any hardscape project.
Read guideOutdoor Stair Design: Safe and Beautiful Grade Changes
Outdoor stairs connect different levels of your landscape while adding architectural interest. Learn about materials, code requirements, and design options.
Read guidePlanning Pavers in Manhattan Beach?
Sit down with your project manager and get an accurate estimate. We call you back within one business day.
Licensed, bonded & insured · CSLB license #1119054