Skip to main content
Side-yard patio with a fire bowl, lounge seating and turf joints at dusk
Design · Permit · Build

Paver & Hardscape Contractor in Porter Ranch

Paver patios, driveways and walls, built on a proper base by our own crews.

Licensed contractor
California general contractor, CSLB #1119054. Bonded and insured.
Typical cost
Paver patio and hardscape: from about $13,000.
Permits
Issued by LADBS. We handle the plans and the submittal.

Built for Porter Ranch Homes

Almost every backyard we touch in Porter Ranch is a hillside problem first and a design problem second. These are graded pads with engineered slopes behind them, so a pool usually means a geotechnical report, setbacks from the top and toe of slope, and often a deepened or caisson-supported shell.

Add the HOA architectural committee in the gated tracts and the fire-zone requirements, and the approval path is genuinely layered.

Typical parcels are graded hillside pads in master-planned tracts, with usable flat yard often bounded by a descending rear slope and a view orientation to protect.

What to Plan For

Pavers last when the base is right. What you see is the top two or three inches. Underneath is excavation to the correct depth, a compacted base, a setting bed and an edge restraint that stops the field from spreading. That work is where a paver job is won or lost, and it is the part a low bid leaves out.

Water comes next. Hardscape changes where rain goes, so we set the slopes and add drains while the ground is open. Fixing drainage after the pavers are down means lifting them again.

The material is your choice. Concrete pavers, porcelain and natural stone such as travertine differ in look, in how hot they get underfoot and in price. A driveway needs a thicker paver and a deeper base than a patio. We bring samples and show the layout in 3D, so the pattern and the borders are settled before we order.

We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.

Permits in Porter Ranch: Building, grading and pool permits are issued by LADBS, with plan check and inspection through the Van Nuys Development Services Center. Much of the community lies within the Porter Ranch Land Use/Transportation Specific Plan (Ordinance 166,068), whose Single-Family Area regulations set use, lot and yard standards; the plan's Project Permit Compliance review excludes single-family dwellings and their accessory buildings.

The hillside terrain places many parcels under the Baseline Hillside Ordinance (No. 184,802), which limits grading, floor area and height, and slopes rising into the Santa Susana Mountains put properties in or adjacent to Very High Fire Hazard Severity Zone mapping with LAFD brush clearance duties and California Building Code Chapter 7A construction requirements.

Most of the newer gated tracts additionally require HOA architectural committee approval before exterior or yard work, and the combined sequence takes as long as it takes.

Permit details checked September 2026 against LADBS, LA City Planning and LAFD. Rules change, so we confirm them again for your parcel.

What We Build

  • HOA architectural submittal packages
  • Slope-setback pool engineering
  • Fire-zone material and clearance compliance
  • Paver patios and pool decks
  • Paver driveways and walkways
  • Concrete, porcelain and natural stone pavers
  • Excavation, compacted base and edge restraint
  • Drainage correction and grading
  • Retaining walls and seat walls
  • Steps, landings and planters
  • Fire pits with built-in seating
  • Artificial turf and turf joints
  • Low-voltage hardscape lighting

Local Conditions

What to Know in Porter Ranch

These local conditions change the scope, the schedule and the budget.

01

Homes sit on engineered graded pads, so pool and structure placement is governed by setbacks from the top and toe of adjacent slopes and often needs deepened footings or caissons.

02

Cut-and-fill pads mean one half of a yard can be competent native ground and the other compacted fill, which changes shell design and shows up plainly in the geotechnical report.

03

Santa Ana wind exposure on the upper streets influences shade structure anchoring, pergola engineering and material choices near the brush line.

04

Fill export from hillside excavation is limited by ordinance and by narrow tract streets, so haul quantity and routing are planning decisions rather than field decisions.

Areas we serve in Porter Ranch:Porter Ranch EstatesRenaissance at Porter RanchWestcliffe at Porter Ranch

Investment

What It Costs in Porter Ranch

Real Southern California price ranges, not teaser numbers.

Paver patio and hardscape

from about $13,000

What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved

Retaining walls

$60 to $150 per face foot

What moves it: height, whether the wall is engineered, material choice, drainage behind the wall, and access for equipment and materials

Artificial turf

from about $9,900

What moves it: area, turf grade, base depth, drainage, and any pet-specific infill

Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.

Get a line-item price for your Porter Ranch property

The Process

How We Work in Porter Ranch

01

Site Review

We measure the area, check soil, slope and drainage, and note access for equipment and materials.

02

Design & 3D

You see the layout, pattern, borders and material in 3D before anything is ordered.

03

Plans & Permits

Walls, driveway approaches and drainage work are drawn and permitted where your city requires it. In Porter Ranch that submittal goes to Los Angeles Department of Building and Safety (LADBS).

04

Demo & Excavation

Old concrete comes out and the area is dug to the depth the new base needs.

05

Base & Pavers

Base is placed and compacted in layers, then the setting bed, pavers, cuts and edge restraint.

06

Joints & Handover

Joints are filled and compacted, the surface is cleaned, and we walk the finished work with you.

Questions

What Porter Ranch Homeowners Ask

Who issues the permits for this work in Porter Ranch?

Los Angeles Department of Building and Safety (LADBS). Building, grading and pool permits are issued by LADBS, with plan check and inspection through the Van Nuys Development Services Center. Much of the community lies within the Porter Ranch Land Use/Transportation Specific Plan (Ordinance 166,068), whose Single-Family Area regulations set use, lot and yard standards; the plan's Project Permit Compliance review excludes single-family dwellings and their accessory buildings.

The hillside terrain places many parcels under the Baseline Hillside Ordinance (No. 184,802), which limits grading, floor area and height, and slopes rising into the Santa Susana Mountains put properties in or adjacent to Very High Fire Hazard Severity Zone mapping with LAFD brush clearance duties and California Building Code Chapter 7A construction requirements.

Most of the newer gated tracts additionally require HOA architectural committee approval before exterior or yard work, and the combined sequence takes as long as it takes. We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

What makes building in Porter Ranch different?

Typical parcels are graded hillside pads in master-planned tracts, with usable flat yard often bounded by a descending rear slope and a view orientation to protect. One local condition that shapes the work: Homes sit on engineered graded pads, so pool and structure placement is governed by setbacks from the top and toe of adjacent slopes and often needs deepened footings or caissons.

Which parts of Porter Ranch do you work in?

All of it, including Porter Ranch Estates, Renaissance at Porter Ranch and Westcliffe at Porter Ranch. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

What does a paver or hardscape project cost in Porter Ranch?

Paver patio and hardscape: generally from about $13,000 across Southern California. What moves it is square footage, paver type, base preparation, drainage, and any steps or retaining involved. We give line-item pricing after seeing the site rather than quoting a number over the phone.

How long does a paver project take?

Most paver patios and walkways take three to six weeks of construction. Driveways, retaining walls and drainage work add time, and so does demolition of thick existing concrete.

Do pavers need a permit?

A patio on grade usually does not. Retaining walls above a certain height, a driveway approach at the street and work that changes drainage often do, and the thresholds differ by city. We check with your building department before we price the job.

Can you pave over my existing concrete?

Sometimes, with thin pavers made for overlays, if the slab is sound and the added height works at doors and steps. A cracked or sinking slab should come out, because the pavers will follow whatever is under them.

How do I look after pavers?

Very little is needed. Sweep them, rinse them, and top up the joint sand if it washes out over the years. If one paver stains or settles it can be lifted and reset, which is the main advantage over poured concrete.

Planning Pavers in Porter Ranch?

Sit down with your project manager and get an accurate estimate. We call you back within one business day.

Licensed, bonded & insured · CSLB license #1119054