Pool & Spa Remodeling in View Park-Windsor Hills

Los Angeles County Public Works, Building and Safety Division (Southwest District Office). View Park-Windsor Hills is unincorporated, so building permits come from Los Angeles County Public Works, Building and Safety, through its Southwest District Office, and long-range planning follows the County's Westside Area Plan, adopted in March 2025. On the western edge, around La Brea and Mansfield avenues, roughly 300 detached single-family parcels sit inside a state Alquist-Priolo Earthquake Fault Zone drawn along the Inglewood fault, part of the Newport-Inglewood-Rose Canyon fault zone. The County's hazard layers also show earthquake-induced landslide zones on parts of the slopes, and place about 90 homes on the western edge in Moderate or High Fire Hazard Severity Zones on the Local Responsibility Area map, with none in Very High and the rest of the residential streets mapped non-wildland. We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

Established single-family lots on streets that the County's Westside Area Plan describes as laid out to follow the contours of the hills. In the County Assessor's parcel map, the middle half of detached lots run about 6,400 to 8,300 square feet, with a median near 7,000. Lots open up on Kenway Avenue and Enoro Drive, where the median is just over 14,000 square feet and most houses date from the 1950s and 1960s. One local condition that shapes the work: Roughly 300 detached parcels on the western edge, along La Brea and Mansfield avenues and streets such as Northridge and Mioland drives, lie inside an Alquist-Priolo Earthquake Fault Zone on the Inglewood fault, so the mapped fault traces are worth locating before an ADU or addition is sited.

All of it, including View Park, Windsor Hills and View Park Historic District. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

New pool construction: generally $70,000 to $150,000+ across Southern California. What moves it is size and shape, spa, water and fire features, decking material, automation, and how much access and grading the site needs. We give line-item pricing after seeing the site rather than quoting a number over the phone.

A straightforward replaster with new tile and coping usually runs three to five weeks. A full remodel that includes new decking, equipment and features typically runs eight to twelve weeks. Site access and permit timing are the two things that move that most.

Most new pool builds run about three to five months from permit to first swim. Hillside sites that need engineered retaining or difficult access sit at the longer end of that range.

If the shell and plumbing are sound and you only dislike the surface, replastering with new tile and coping is the efficient choice. If the equipment is aging, the deck is cracked or the shape no longer suits how you use the yard, a full remodel costs less than doing it in two separate phases.

Yes. Our own crews handle the build rather than passing it to a rotating set of subs, which is why the schedule and the finish standard stay consistent.