Skip to main content
Aerial view of a backyard with a pergola, outdoor kitchen, artificial turf and large pavers
Design · Permit · Build

Patio Cover & Pergola Contractor in Venice

Patio covers and pergolas, engineered, permitted and built by our own crews.

Licensed contractor
California general contractor, CSLB #1119054. Bonded and insured.
Typical cost
Pergola and shade structure: from about $9,500.
Permits
Issued by LADBS. We handle the plans and the submittal.

Built for Venice Homes

Groundwater is the first thing we look at. Near the canals and the beach, groundwater can sit shallow enough to reach a pool excavation, which means dewatering, hydrostatic relief and a heavier shell than the drawings first suggest. Narrow walk-street and canal lots rarely take a truck, so material moves by hand or over the roof by crane. On top of all that, almost every parcel needs a coastal permit before a shovel moves.

Unusually narrow lots on walk streets, canals and alley-loaded blocks, with small deep rear yards and minimal street frontage.

What to Plan For

A patio cover is a structure, and it is designed like one. Attached to the house, it has to tie into the existing framing properly. Freestanding, it stands on its own footings. Either way the span, the posts and the footings are sized for the roof it carries, and that is what a building department reviews.

The roof decides how the space gets used. An open pergola filters the sun and keeps the sky. A solid roof gives real shade and shelter from rain. A louvered roof opens and closes, so you can have both. Wood, aluminum and steel each look and age differently, and we show you the options in 3D against your own house.

It is rarely built alone. Lighting, fans and heaters need power run to the structure, and the patio underneath often gets rebuilt at the same time. Planning them as one project means the posts land where the paving and the furniture want them.

We are a design-build team, which means the people who draw your project are the people who build it. Design, engineering, permits and construction run through one project manager and our own crews, so nothing gets lost in a handoff between a salesperson and a subcontractor. We are licensed, bonded and insured, CSLB license #1119054.

Permits in Venice: Building, grading and pool permits are issued by LADBS because this is part of the City of Los Angeles, but nearly the whole community sits inside the coastal zone. The Venice Local Coastal Program is still not fully certified (a Land Use Plan certified in 2001 is in place while an updated plan is being drafted with the California Coastal Commission) so projects need a coastal development permit through Los Angeles City Planning, and city decisions remain appealable to the Commission.

Most projects also require a Venice Coastal Zone Specific Plan (Ordinance No. 175,693) determination or specific plan exemption before a building permit can be issued. In the mapped dual permit jurisdiction area a separate Coastal Commission permit is required as well, so entitlement duration varies widely.

Permit details checked September 2026 against LADBS, LA City Planning and State of California. Rules change, so we confirm them again for your parcel.

What We Build

  • High water table pool engineering and dewatering
  • Coastal development permit and specific plan clearance
  • Crane and conveyor material handling on no-access lots
  • Attached patio covers
  • Freestanding pergolas and pavilions
  • Louvered roof systems
  • Solid roof covers
  • Wood, aluminum and steel structures
  • Engineered posts, beams and footings
  • Lighting, fans and heaters, wired in
  • Covers over outdoor kitchens and dining
  • Paver or concrete patios beneath
  • Plans, engineering and permits

Local Conditions

What to Know in Venice

These local conditions change the scope, the schedule and the budget.

01

Groundwater near the canals and the beach can be shallow, which can require dewatering during excavation and hydrostatic relief in the finished pool shell.

02

Sandy fill mapped for liquefaction pushes pool and foundation design toward deeper structural solutions than the same project would need a few miles inland.

03

Narrow walk-street and canal lots have no direct vehicle access, so excavated soil, gunite and hardscape material move by conveyor, buggy or crane over the roofline.

04

Salt-laden air and blowing sand shorten the life of untreated metal, so equipment enclosures, fasteners and outdoor kitchen components are specified for that exposure.

Areas we serve in Venice:The Venice CanalsOakwoodMilwoodEast VeniceAbbot Kinney DistrictMarina Peninsula

Investment

What It Costs in Venice

Real Southern California price ranges, not teaser numbers.

Pergola and shade structure

from about $9,500

What moves it: span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating

Paver patio and hardscape

from about $13,000

What moves it: square footage, paver type, base preparation, drainage, and any steps or retaining involved

Landscape and architectural lighting

$3,000 to $12,000

What moves it: number of fixtures, transformer and cable runs, fixture quality, and whether the system is put on smart control

Your lot, access and finishes set the price. We walk the site, then show you where every dollar goes.

Get a line-item price for your Venice property

The Process

How We Work in Venice

01

Site Review

We measure the patio and the house, check where posts and footings can go, and note sun and sight lines.

02

Design & 3D

You see the cover in 3D on your own house, open, solid or louvered, in the material you choose.

03

Plans & Permits

The structure is drawn and engineered, and submitted for a permit where your city requires one. In Venice that submittal goes to Los Angeles Department of Building and Safety (LADBS).

04

Footings & Posts

Footings are dug and poured, then posts are set plumb and anchored.

05

Frame & Roof

Beams, rafters and the roof system go on, with power run for lighting, fans and heaters.

06

Finish & Handover

Stain, paint or powder coat, final electrical, inspection where one applies, and a walkthrough.

Questions

What Venice Homeowners Ask

Who issues the permits for this work in Venice?

Los Angeles Department of Building and Safety (LADBS). Building, grading and pool permits are issued by LADBS because this is part of the City of Los Angeles, but nearly the whole community sits inside the coastal zone. The Venice Local Coastal Program is still not fully certified (a Land Use Plan certified in 2001 is in place while an updated plan is being drafted with the California Coastal Commission) so projects need a coastal development permit through Los Angeles City Planning, and city decisions remain appealable to the Commission.

Most projects also require a Venice Coastal Zone Specific Plan (Ordinance No. 175,693) determination or specific plan exemption before a building permit can be issued. In the mapped dual permit jurisdiction area a separate Coastal Commission permit is required as well, so entitlement duration varies widely.

We prepare the drawings, make the submittal and handle plan-check corrections ourselves, so you are not the one chasing plan check.

What makes building in Venice different?

Unusually narrow lots on walk streets, canals and alley-loaded blocks, with small deep rear yards and minimal street frontage. One local condition that shapes the work: Groundwater near the canals and the beach can be shallow, which can require dewatering during excavation and hydrostatic relief in the finished pool shell.

Which parts of Venice do you work in?

All of it, including The Venice Canals, Oakwood, Milwood and East Venice. Our crews run every job out of our Cahuenga Pass base in Los Angeles, with our own people on site.

What does a patio cover or pergola cost in Venice?

Pergola and shade structure: generally from about $9,500 across Southern California. What moves it is span, material (wood, aluminum or louvered), footing requirements, and integrated lighting or heating. We give line-item pricing after seeing the site rather than quoting a number over the phone.

Do I need a permit for a patio cover or pergola?

Usually yes for a cover attached to the house or one with a solid roof. Small freestanding pergolas are treated differently from city to city, and adding electrical brings its own permit. We check the rule with your building department before we price the job.

Wood, aluminum or a louvered roof?

Wood is warm and can be shaped to match almost any house, and it needs refinishing over the years. Aluminum needs very little upkeep and suits a clean, modern look. A louvered roof costs more and lets you open the space to the sky or close it for shade and rain.

Can it have lights, a fan and heaters?

Yes. They are far cleaner to add when they are planned, because the wiring runs inside the posts and beams. Adding them later usually means surface conduit.

How long does a patio cover take?

The build itself is short compared with the planning. Engineering and the plan review in your city usually set the schedule, so we give you a real timeline once we know which review your project needs.

Planning a Patio Cover in Venice?

Sit down with your project manager and get an accurate estimate. We call you back within one business day.

Licensed, bonded & insured · CSLB license #1119054